2OM-1751-003w_G5S - 第347页
2OM-1751 6-75 (6) When the outward length teaching is completed, check the data and press the [Fixed] button. (When the outward length and/or the component angle is different,correct the graphic errors.) Note T o turn th…
2OM-1751
6-74
(4) Press the [Teaching] button to select the teaching method.
Note
When the [Editing] button has been selected, the editing operation is
performed based on the sample data. Press the [Complete] button to return
to the component library teaching window.
F2F72
(5) Press the [Teach] button to perform the outward length teaching operation.
Note
Make sure that the component is within a frame with dot lines and if not,
adjust it again.
F2F73
1303-001
7.3 "COMP RCG" Test Window
2OM-1751
6-75
(6) When the outward length teaching is completed, check the data and press the
[Fixed] button.
(When the outward length and/or the component angle is different,correct the
graphic errors.)
Note
To turn the graphic, click the coordinate graphic and drag either one of the
arrow ends.
F2F74
(6-1) Press the [Modify] button.
(The following window will appear. Select the modication method.)
F2F75
Note
The indicated data may contain some fractional parts in the values.
At the end of the teaching operation, these fractional parts are truncated.
1303-001
7.3 "COMP RCG" Test Window
2OM-1751
6-76
(7) Press the [Teach] button to perform the lead teaching.
F2F76
(8) When the lead teaching is completed, check the data and press the [Fixed]
button.
F2F77
1303-001
7.3 "COMP RCG" Test Window