2OM-1751-003w_G5S - 第38页
Safety Precautions Safe-29 1OM-1751 5. Alert Labels 1305-002 No. Alert Labels and Description (17) 10-0333- Never disconnect the connector during the feeder base lifting operation. Doing so might cause a sys t em mal f u…
Safety Precautions
Safe-28
1OM-1751
1305-002
5. Alert Labels
No. Alert Labels and Description
(13)
Description
Do not drop a feeder. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.
(14)
00-0293-
Description
Because the temperature of this section is very high, do not touch. Doing so might
cause a burn.
(15)
00-0263-
Description
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
(16)
10-0252-
The machine will be break down.
Trained Personnel Only!
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
Safety Precautions
Safe-29
1OM-1751
5. Alert Labels
1305-002
No. Alert Labels and Description
(17)
10-0333-
Never disconnect the connector during
the feeder base lifting operation.
Doing so might cause a system malfunction.
Description
Do not disconnect the connector during the feeder base moving-up operation.
Doing so might cause a malfunction of the system.
(18)
10-0335-
Keep Linear Guide Grooves
Clear of Any Object!
An object in the groove may be trapped in the
moving part, causing the machine to be damaged.
Description
Keep the linear guide grooves clear of any object. Otherwise, an object in the
groove may be trapped in the moving part, causing the machine to be damaged.
(19)
Description
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
Safety Precautions
Safe-30
1OM-1751
1305-002
No. Alert Labels and Description
(20)
Do not touch your hand
onto the head block.
10-0330-
Description
Do not put your hand on the head block.
If signicant force is applied to the head block, it might deform.
(21)
10-0314-
Push here when performing maintenance.
Description
Do not put your hand on the reference mark block.
When a strong force is given to the reference mark block, it might be deformed.
5. Alert Labels