2OM-1751-003w_G5S - 第39页
Safety Precautions Safe-30 1OM-1751 1305-002 No. Alert Labels and Description (20) Do not touch your hand onto the head block. 10-0330- Description Do not put your hand on the head block. If signicant force is applied…
Safety Precautions
Safe-29
1OM-1751
5. Alert Labels
1305-002
No. Alert Labels and Description
(17)
10-0333-
Never disconnect the connector during
the feeder base lifting operation.
Doing so might cause a system malfunction.
Description
Do not disconnect the connector during the feeder base moving-up operation.
Doing so might cause a malfunction of the system.
(18)
10-0335-
Keep Linear Guide Grooves
Clear of Any Object!
An object in the groove may be trapped in the
moving part, causing the machine to be damaged.
Description
Keep the linear guide grooves clear of any object. Otherwise, an object in the
groove may be trapped in the moving part, causing the machine to be damaged.
(19)
Description
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
Safety Precautions
Safe-30
1OM-1751
1305-002
No. Alert Labels and Description
(20)
Do not touch your hand
onto the head block.
10-0330-
Description
Do not put your hand on the head block.
If signicant force is applied to the head block, it might deform.
(21)
10-0314-
Push here when performing maintenance.
Description
Do not put your hand on the reference mark block.
When a strong force is given to the reference mark block, it might be deformed.
5. Alert Labels
Safety Precautions
Safe-31
1OM-1751
1303-001
6. Precautionary Items for Correct Operations
6. Precautionary Items for Correct Operations
Requirements for Installation
Be sure to fulll the following requirements for safety purposes.
•
Overvoltage Category : Category
III
•
Pollution Degree : 3
•
Altitude : 1,000 m or less above the sea level
Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
provided at the specied Pollution Degree.
Category III : Primary circuits of a device to which power is directly supplied
from the power distribution panel, and circuits from the
distribution panel to outlets.
Note
The term was changed from "Installation Category" to "Overvoltage Category".
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 3 : Conductive pollution or dry nonconductive pollution that be-
comes conductive due to condensation occurs. To be found in
industrial environment or construction sites (harsh environ-
ments).
Altitude means the height above sea level of the place where the machine is to be used.
Note
When the machine is used in a place that has an altitude of 1,000 meters or more,
consult with the Marketing Dept of Yamaha Motor Co., Ltd. or a sales agent.