2OM-1751-003w_G5S - 第73页

2OM-1751 1-21 4.1.1 With the start of step described This function is used when the step is designated in the component reload, recovery or test PCB placement operation, etc. There are two types of start with the step de…

2OM-1751

1-20

[2] "Start Mode" Selection Buttons

Using the following buttons, the start mode is setup.

[Auto] Button

Select this button to start up the machine automatically.

[Semi-Auto Step] Button

When this button is pressed, the designated step operation (one component/

point) is performed.

[Semi-Auto Any Desig] Button

When this button is pressed, the designated step operation (Designating two

or more steps is available) is performed.

[3] Cancel Run

When the [Cancel] button is pressed, the "Pause" condition is cancelled and

the machine is turned to the "STOP" mode.

Note

When the machine is set in the "PAUSE" mode by pressing the [STOP]

button on the operation panel during the automatic operation, etc., the

[Cancel] button becomes available.

1303-001

4.1 "Run Mode" Tab Sheet

2OM-1751

1-21

4.1.1 With the start of step described

This function is used when the step is designated in the component reload,

recovery or test PCB placement operation, etc.

There are two types of start with the step designated: Semi-Auto Step and Semi-

Auto Step Any Desig (free designation).

The display window and start procedure are described as follows.

•

Description of Semi-Auto Step

A single step operation (1 component/point) can be designated.

Description of "Semi-Auto Step" Window

When the [Semi-Auto Step] button is pressed in the "Start Mode" group box,

the following window appears.

[1]

[2]

[3] [4]

F2A18

[1] "Find" (Search) Section

The search can be performed with "Symbol", "O Comment" and "P

Comment" data. Entering the set parameters in "Symbol", "O Comment" and

"P Comment" data box and pressing the [

] or [ ] button designate

the entered step.

1303-001

4.1 "Run Mode" Tab Sheet

2OM-1751

1-22

[2] Step Display Section

The No. of total steps in the pattern program set in the machine, is displayed

in this section.

Setting the cursor on the step can also designate the step.

Note

In normal cases, the starting step Nos. are displayed in the order of actual

component placement.

By pressing the [O] or the [P] button, the steps can be re-arranged in the

ascending order.

Even when the step Nos. are rearranged, the component placement order is

not changed.

[3] [Desig Step] Button

The step No. can be entered and designate in the entry window displayed by

pressing the [Desig Step] button.

Enter the step No. in the order of "U", "O" and "P".

[4] [Last placement Mv.to another stp] Button

When this button is pressed, the step is moved to the "Last placement Mv. to

another stp" (nal placement step) position.

Starting Procedure for the Semi-Auto Step Designation

Procedure

(1) Place the PCB on the position of the step operation to be

designated.

Note

Transfer and place the PCB manually onto the aimed position.

(2) Designate the step to be started using either of the above

procedures.

Note

The background of the designated step is turned in blue.

(3) When the [START] button on the operation panel is pressed, the

designated step operation is started.

1303-001

4.1 "Run Mode" Tab Sheet