2OM-1751-003w_G5S - 第75页

2OM-1751 1-23 1303-001 • Description of Semi-Auto Step Any Desig (free designation) T wo or more steps can be designated. Description of "Semi-Auto Step Any Desig" Window When the [Semi-Auto Step Any Desig] but…

100%1 / 380
2OM-1751
1-22
[2] Step Display Section
The No. of total steps in the pattern program set in the machine, is displayed
in this section.
Setting the cursor on the step can also designate the step.
Note
In normal cases, the starting step Nos. are displayed in the order of actual
component placement.
By pressing the [O] or the [P] button, the steps can be re-arranged in the
ascending order.
Even when the step Nos. are rearranged, the component placement order is
not changed.
[3] [Desig Step] Button
The step No. can be entered and designate in the entry window displayed by
pressing the [Desig Step] button.
Enter the step No. in the order of "U", "O" and "P".
[4] [Last placement Mv.to another stp] Button
When this button is pressed, the step is moved to the "Last placement Mv. to
another stp" (nal placement step) position.
Starting Procedure for the Semi-Auto Step Designation
Procedure
(1) Place the PCB on the position of the step operation to be
designated.
Note
Transfer and place the PCB manually onto the aimed position.
(2) Designate the step to be started using either of the above
procedures.
Note
The background of the designated step is turned in blue.
(3) When the [START] button on the operation panel is pressed, the
designated step operation is started.
1303-001
4.1 "Run Mode" Tab Sheet
2OM-1751
1-231303-001
•
Description of Semi-Auto Step Any Desig (free designation)
Two or more steps can be designated.
Description of "Semi-Auto Step Any Desig" Window
When the [Semi-Auto Step Any Desig] button is pressed in the "Start Mode"
group box, the following window appears.
[1]
[2]
[3]
[4]
F2A19
[1] No. of Total Steps and Designated Step Count Display Section
The No. of total steps and No. of designated steps are displayed in this
section.
[2] [Any step designation] Button
When this button is pressed, the "Any Step Designation" Window appears.
[3] [Start] Button
When this button is pressed, the designated step operation is started.
[4] [Placement Step Clear] Button
When this button is pressed, the placement step operation designated in the
"Any Step Designation" mode, is cleared.
4.1 "Run Mode" Tab Sheet
2OM-1751
1-24
Description of "Any step designation" Window
When the [Any step designation] button is pressed in the "Semi-Auto Step Any
Desig" Window, the following window appears.
[1]
[2]
[3] [4]
[5]
[6]
F2A20
[1] No. of Total Steps and Designated Step Count Display Section
The No. of total steps and No. of designated steps are displayed in this
section.
[2] Step Display Section
The total No. of steps in the pattern program set in the machine, is displayed.
Setting the cursor on the step item in the list, designates the step. The
background color changes as follows.
Blue
：
This shows the moved step, which has not been designated.
Yellow
：
This shows the step, which has already been designated.
Green
：
This shows the step, which has been last designated.
Note
In normal cases, the starting step Nos. are displayed in the order of actual
component placement.
By pressing the [O] or the [P] button, the steps can be re-arranged in the
ascending order.
Even when the step Nos. are rearranged, the component placement order is
not changed.
[3] [Desig.Step] Button
The step No. can be entered and designate in the entry window displayed by
pressing the [Desig Step] button.
Enter the step No. in the order of "U", "O" and "P".
1303-001
4.1 "Run Mode" Tab Sheet