JO-072-006_w.pdf - 第11页

Safety Precautions Safe-2 AKBEG-ID 0508-001 • Identifying Alert Icons : This symbol mark represents danger or prompts warning. : This symbol mark represents prohibited operations. : This symbol mark represents forced ope…

100%1 / 137
Safe-1
AKBEG-ID
Safety Precautions
0508-001
"Safety Precautions" describes the precautionary items that should be kept to prevent
personal injury or property damage beforehand and use the feeder adjusting jig safely.
Before using this feeder adjusting jig, please understand the contents of the
following safety precautions.
1. About Safety Precaution Labels
The safety precautions are expressed, using the combinations of safety alert symbols
"
" and headwords such as "WARNING", or "CAUTION" according to the degree of
danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols "
" are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid
any possibility of injury or death.
WARNING
This indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
A precautionary item identied as "
CAUTION" may also lead the operator
to reach a serious result. To avert a serious result, please respect the described
cautions.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in property damages.
Safety Precautions
Safe-2
AKBEG-ID
0508-001
•
Identifying Alert Icons
: This symbol mark represents danger or prompts warning.
: This symbol mark represents prohibited operations.
: This symbol mark represents forced operations or instructions.
Safe-3
AKBEG-ID
Safety Precautions
0809-002
2. Common Precautionary Items
Basic Precautions
l
Only a well-trained person should handle the feeder adjusting jig.
Do not allow any untrained person to handle the jig.
Mishandling of the jig can cause a serious accident.
l
Before using the feeder adjusting jig, please read the instruction manual carefully for
correct operations.
l
Please keep the instruction manual in a safe place within
reach.
l
Follow the instructions in the instruction manual for correct handling of the feeder
adjusting jig.
l
Be sure to fully understand the contents of the safety inst
ructions in the instruction
manual and follow the instructions.
l
Pay special attention to the precautionary items described
in the instruction manuals of
the machine (GXH-1/GXH-3 series) and the feeder adjusting jig.
When the precautionary items are ignored, it will result
in personal injury or property
damage (damage to the machine).
l
Be sure to follow the operational instructions described in the instruction manual.
l
Do not modify the feeder adjusting jig nor use any parts other than the specied ones.
Doing otherwise may cause personal injury
.
l
Do not perform any operations other than those described
in the instruction manual.
Whenever a problem arises, regarding the jig operation
s, performance, etc., please
contact the marketing department or sales agency of Hitachi High-Technologies for the
solution.
l
Although the precautionary items have been reviewed rep
eatedly
, an incident far
beyond our expectation may occur.
Not only follow the precautionary instructions describe
d in the instruction manual but
also try to handle the feeder adjusting jig carefully at your discretion all the time.
Be sure to strictly keep the above-mentioned instructions. Otherwise, not only the
component pickup position cannot be adjusted correctly but also personal injury will
result.