JO-072-006_w.pdf - 第42页

2-5 AKBEG-ID 1.1.3 Procedure for Detachment of Fixtures Procedure (1) Detach the xtures for both Y and X axes. Fixture for Y Axis Fixture for X Axis Screw (M4) Screw (M3) Screw (M3) Fig. B7 (2) Fix the clamp plate (acce…

2-4

AKBEG-ID

(4) Fasten the cables with tie wraps.

Adjust the tie wraps to the location of the tie mounts and x them on

the tie mounts after tightening the cable ties.

Tie Mount

Bundle

Fig. B5

The cameral cable should also be bundled and xed on the tie mounts

using the tie wraps.

Camera Cable

Fig. B6

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

0809-002

2-5

AKBEG-ID

1.1.3 Procedure for Detachment of Fixtures

Procedure

(1) Detach the xtures for both Y and X axes.

Fixture for Y Axis

Fixture for X Axis

Screw (M4)

Screw (M3)

Fig. B7

(2) Fix the clamp plate (accessory) with the screws (M3) that were used to

fasten the xtures and tighten the clamp screw for rm attachment.

X Axis

Y Axis

Clamp Screw

Clamp Plate

Screw (M3)

Fig. B8

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

0809-002

2-6

AKBEG-ID

(3) Detach the camera end protection cap located inside the LED lighting

unit.

Protection Cap

Fig. B9

No image can be captured with the protection cap attached.

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

0809-002