JO-072-006_w.pdf - 第43页

2-6 AKBEG-ID (3) Detach the camera end protection cap located inside the LED lighting unit. Protection Cap Fig. B9 No image can be captured with the protection cap attached. 1.1 Procedures for Attachment of Camera Unit a…

2-5

AKBEG-ID

1.1.3 Procedure for Detachment of Fixtures

Procedure

(1) Detach the xtures for both Y and X axes.

Fixture for Y Axis

Fixture for X Axis

Screw (M4)

Screw (M3)

Fig. B7

(2) Fix the clamp plate (accessory) with the screws (M3) that were used to

fasten the xtures and tighten the clamp screw for rm attachment.

X Axis

Y Axis

Clamp Screw

Clamp Plate

Screw (M3)

Fig. B8

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

0809-002

2-6

AKBEG-ID

(3) Detach the camera end protection cap located inside the LED lighting

unit.

Protection Cap

Fig. B9

No image can be captured with the protection cap attached.

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

0809-002

2-7

AKBEG-ID

1.2 Cable Connection

Notice

Check the seals on the device side and the cable ID plates. Both

IDs should match each other when the cables are connected.

Seals

ID Plates

Fig. B10

Fig. B11 Connection of Cables for Camera (used to capture the image of the pickup position)

1.2 Cable Connection

0809-002