JO-072-006_w.pdf - 第51页
2-14 AKBEG-ID 2.2 Ending the Program (1) Press the [ ] button located on the upper right side of each window . (2) The "Exit Conrmation" dialog box opens. Press the [Y es] or the [Cancel] button. When you sele…
2-13
AKBEG-ID
(4) After the registration (jig origin adjustment) of the master position is
completed, the following window opens, enabling you to perform a
feeder measurement.
Reference
Refer to "2. Feeder Measurement" in "Section 4" for how to measure a feeder.
Fig. B17
0809-001
2.1 Starting the Program
2-14
AKBEG-ID
2.2 Ending the Program
(1) Press the [ ] button located on the upper right side of each window.
(2) The "Exit Conrmation" dialog box opens. Press the [Yes] or the
[Cancel] button.
When you select the [Yes] button, you can exit from t
he program.
Selecting the [Cancel] button resumes the origin window.
Fig. B18
When the Windows shutdown function is valid (default), the "Windows" system
program also closes.
To invalidate the function, the authority higher than the power user is
required.
Tick the check box "Windows Shutdown after Exiting" located on
the lower left side of the "Exit Conrmation" dialog box. The "Tick"
mark disappears.
When the program is started again, press the [
] icon on the desktop
of the personal computer.
0809-001
2.2 Ending the Program
Procedure
3-A
AKBEG-ID
0508-001
Section 3
Description of Windows
This section describes the details of each window.
•
Administrative Authority Change
•
Set Data Change
•
"Type Listup" Window
•
"Type Setting" Window
•
"System Setting" Window
•
"Measurement" Window
•
"Errors" Window