JO-072-006_w.pdf - 第88页
4-3 AKBEG-ID (3) The "Master Setting" window opens. Conrm that a crosshair is dis - played in the window . When no crosshair is displayed, press the [+] button in the window to make it appear . (4) Move the mi…
4-2
AKBEG-ID
CAUTION
Do not give a strong shock to the pickup position
master nor put any object on the master.
The pin of the pickup position master may be bent,
ruining the accuracy of the jig origin adjustment.
Pin of Pickup Position Master
Fig. D2 Pin of Pickup Position Master
(2) Press the [Master Setting] button in the "Initial Master Setting" win-
dow.
Fig. D3
0508-001
1. Registration of Master Position (Jig Origin Adjustment)
4-3
AKBEG-ID
(3) The "Master Setting" window opens. Conrm that a crosshair is dis-
played in the window.
When no crosshair is displayed, press the [+] button in the window
to make it appear.
(4) Move the micrometer until the center of the crosshair is aligned
with the pin center of the pickup position master.
CAUTION
Do not give a strong shock to the micrometer by
hitting against human body or an object. Otherwise,
the micrometer may be damaged, resulting in
inaccurate adjustment of the feeder's component
pickup position.
X (-)
Y (-)
X (+)
Y (+)
Pin of Pickup Position Master
Crosshair
Direction of Tape Feed
Fig. D4 "Master Setting" Window
0508-001
1. Registration of Master Position (Jig Origin Adjustment)
4-4
AKBEG-ID
To enlarge the image, press the [Enlarge] button in the "Master Setting" window.
To get the original size, press the [Return] button.
Fig. D5
(5) Press the "ZERO/ABS" switch of the micrometer to reset the indi-
cated value of the micrometer head to "0.000".
"ZERO/ABS" Switch
Fig. D6 Micrometer
0508-001
1. Registration of Master Position (Jig Origin Adjustment)