00198092-01_JC_PM_WF2_TX_EN - 第24页
www.asm-smt.com
4 WF 2 TX-Series Maintenance Empty and clean nozzle reject bin 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T2
Wear Part: Consumables:
C3
www.asm-smt.com
1 Remove the nozzle reject bin. 2 Empty the reject bin into a waste box. 3 Clean the reject bin.
4 Return the reject bin and repeat steps for
all gantries.
www.asm-smt.com
5 WF 2 TX-Series Maintenance Remove the C&P20 P head 12 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T49, T62
Wear Part: Consumables:
www.asm-smt.com
1 Move gantries to the good working posi-
tion.
2 Fit the component sensor protection cap. 3 Unplug the compressed air connections
from the head.
4 Disconnect the ribbon cables. 5 Unlock the camera cables. 6 Unplug the two camera cables.