00198092-01_JC_PM_WF2_TX_EN - 第3页
www.asm-smt.com Introduction Safety Introduction Equipment required for Workflow 2 Maintenance TX-Series 1 Check head status C&P20 P/ CPP 2 Shut down and remove tables and exchange nozzles with JTF-ML 3 Shut down and…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties
for their own purposes could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198092-01
www.asm-smt.com Printed by ASM Assembly Systems
www.asm-smt.com
Introduction
Safety Introduction
Equipment required for Workflow 2 Maintenance TX-Series
1 Check head status C&P20 P/ CPP
2 Shut down and remove tables and exchange nozzles with JTF-ML
3 Shut down and remove tables and exchange nozzles without JTF-ML
4 Empty and clean nozzle reject bin
5 Remove the C&P20 P head
6 Return a maintained C&P20 P head
7 Cleaning the Z-Axis C&P20 P
8 Check and clean the magnetic surfaces and scale of X and Y-Axis
9 Clean conveyors, lifting tables, gantry cables
10 Clean the stationary camera (CPP/ TH)
11 Clean feeder modules and cut the tapes
12 Switch on machine and return the tables with JTF-ML
13 Switch on machine and return the tables without JTF-ML
14 Calibration C&P20 P
15 Check the cover fans
16 Check filter disc: C&P20 P
17 Check nozzle seating: CPP and C&P20 P
18 Endurance run
Table of Contents
www.asm-smt.com
Table of Contents