00195440-05-SG_D-Series_FSE-EN - 第141页
8 Gantry 8.4.2 Gantry Settings 8.4 Settings Student Guide SIPLACE D-Series (FSE) 141 * Equipment in addition to standard manual tools 8.4.2.1 8 . 4 . 2 . 1 F it t in g t h e I n c r e m e n t a l S c a le Fitting the Inc…
8 Gantry
8.4 Settings 8.4.2 Gantry Settings
140 Student Guide SIPLACE D-Series (FSE)
8.4.2
8.4.2 Gantry Settings
Gantry Settings
Settings/checks
Assembly Tools & equip-
ment *
Setting type Comments See also
X-drive
X-motor D1/
D1i/D2/D2i
Belt tension
measuring de-
vice
X belt is set at tensioning key to 44 +/
-1 Hz / axis dynamics
D4/D4i / D2/D2i/
D1/D1i measure
at front belt if the
head is at far left,
against X motor.
SA
X belt D1/D1i/
D2/D2i
Belt tension
measuring de-
vice
X belt is set at tensioning key to 44 +/
-1 Hz / axis dynamics
X deflection
unit D1/D1i/
D2/D2i
Belt tension
measuring de-
vice
X belt is set at tensioning key to 44 +/
-1 Hz / axis dynamics
X-motor D4/
D4i
Belt tension
measuring de-
vice
X belt is set at tensioning key to 53 +1/
-3 Hz / axis dynamics
SA
X belt D4/D4i Belt tension
measuring de-
vice
X belt is set at tensioning key to 53 +1/
-3 Hz / axis dynamics
X deflection
unit D4/D4i
Belt tension
measuring de-
vice
X belt is set at tensioning key to 53 +1/
-3 Hz / axis dynamics
X brake Screw in screw as far as possible,
with defined spring tension.
X drive mag-
nets (second-
ary part)
Glued to CFK gantry – not individually
replaceable
D3 only
X-axis incre-
mental encod-
er
0.4 mm foil Align encoder to scale & with 0.4 mm
space to scale / axis function – dy-
namics?
Align to count
track - fiducials on
encoder
X incremental
scale
0.4 mm space to scale / axis function
– check dynamics.
Reserved for
Siplace Service,
for D2/D2i/D1/D1i
D3 - glue in place
/ for D4/D4i screw
in place
Y drive Linear motor
Y drive mag-
nets (second-
ary part)
0.8 mm space below and between the
boards
D/Di-series
Y brakes Pretension due to gantry suspension D/Di-series
Y-axis incre-
mental encod-
er
0.4 mm foil Align encoder to scale & with 0.4 mm
space to scale / axis function – dy-
namics?
Align to count
track - fiducials on
encoder
Y incremental
scale
Align along the Y guide rail with spe-
cial tool/ 0.4 mm space to scale / axis
function – check dynamics in continu-
ous run.
Reserved for
Siplace Service -
different gauges
to be glued in
place, for D4/D4i/
D3/D2/D2i/D1/D1i
8 Gantry
8.4.2 Gantry Settings 8.4 Settings
Student Guide SIPLACE D-Series (FSE) 141
*
Equipment in addition to standard manual tools
8.4.2.1
8.4.2.1 Fitting the Incremental Scale
Fitting the Incremental Scale
8.4.2.2
8.4.2.2 FSE Note
FSE Note
Gantry head
distributor
DIP switch as specified for the respec-
tive gantry arrangement
'Head interface’ Currently
---
Head distribu-
tor
––– 'Gantry interface’ Currently
---
Trailing cable
distributor
––– Trailing cable in-
terface
Currently
---
Axis dynamics
X-motor (pri-
mary part)
Axis Dynamics D3 (5ms faster
than with 602)
Y-motor Axis Dynamics D3 (5ms faster
than with 602)
Y drive mag-
nets
Axis dynamics – check urgently rec-
ommended as the motor magnet
spacing or the space between the in-
dividual magnetic plates could influ-
ence the axis dynamics of the linear
drives.
D3
Assembly Tools & equip-
ment *
Setting type Comments See also
NOTICE
X incremental scale
► The X incremental scale on the D4/D4i is glued to a metal strip, which can be unscrewed.
► The X incremental scale on the D3 is to be glued onto an aluminum strip, along the stopper
edge. Before stripping off the scale, mark where it starts on the aluminum strip.
NOTICE
Art und Quelle der Gefahr
Individual gauges are available for correct positioning of all incremental scales used for the X/
Y axes. The spare parts set for the scale includes instructions for usage. This service work may
only be performed by SIPLACE service technicians.
8 Gantry
8.5 Room for Your Sketches and Notes 8.4.2 Gantry Settings
142 Student Guide SIPLACE D-Series (FSE)
8.5
8.5 Room for Your Sketches and Notes
Room for Your Sketches and Notes