00195440-05-SG_D-Series_FSE-EN - 第220页
12 Modular Conveyor 12.3 Conveyor Settings 12.2.2 Technical Data - Dual Conveyor 220 Student Guide SIPLACE D-Series (FSE) 12.2.2 1 2 . 2 . 2 T e c h n ic a l D a t a - D u a l C o n v e y o r Technical Data - Dual Convey…
12 Modular Conveyor
12.1.16 Overview of Flexible Dual Conveyor 12.2 Technical data
Student Guide SIPLACE D-Series (FSE) 219
12.1.16
12.1.16 Overview of Flexible Dual Conveyor
Overview of Flexible Dual Conveyor
12.2
12.2 Technical data
Technical data
12.2.1
12.2.1 Technical Data - Single Conveyor
Technical Data - Single Conveyor
Legend
1. Dual conveyor "Standard", max. width 2 x 216 mm
2. Dual conveyor "Widened", max. width 2 x 242 mm
3. Dual conveyor "Widened" - "Standard", max. width 1
x380 mm
4. Dual conveyor "Extra wide", max. width 1 x 430 mm
5. Fixed conveyor side on right
6. Lane 1
7. Lane 2
8. Board
CAUTION! Long board option
The long board stopper needs to be removed when using
a dual conveyor for single lane operation!
Edge of fixed conveyor side Right (standard), left (optional)
Max. component height 6 mm for the C&P12
PCB format (LxW) 50mm x 50 mm up to 368 mm x 460 mm
Long board up to 610 mm (24"), (option)
PCB thickness 0.3 mm to 4.5 mm
Max. PCB warpage upwards: 6 mm - board thickness
downwards: 0.3 mm + PCB thickness
Clearance on board underside max. 40 mm
PCB transport height 830 mm ±15 mm (Standard)
900 mm ±15 mm (Option)
930 mm±15 mm (Option)
950 mm ±15 mm (Option SMEMA height)
Type of interface SMEMA (Standard)
SIEMENS (Option)
PCB weight 3 kg
Component-free PCB handling edge 3 mm
12 Modular Conveyor
12.3 Conveyor Settings 12.2.2 Technical Data - Dual Conveyor
220 Student Guide SIPLACE D-Series (FSE)
12.2.2
12.2.2 Technical Data - Dual Conveyor
Technical Data - Dual Conveyor
12.3
12.3 Conveyor Settings
Conveyor Settings
12.3.1
12.3.1 Setting the Fixed Conveyor Side (Single and Dual Conveyor)
Setting the Fixed Conveyor Side (Single and Dual Conveyor)
12.3.1.1
12.3.1.1 General Notes
General Notes
PCB changeover time 2.5 s
Ink spot recognition Possible
Automatic width adjustment Possible
Edge of fixed conveyor side Right (standard), left (optional)
Max. component height 6 mm for the C&P12
PCB format(LxW) 50mm x 50 mm up to 368 mm x 216 mm
2" x 2" to 18" x 8.5"
Long board up to 610 mm (24"), (option)
PCB thickness 0.3 mm to 4.5 mm
Max. PCB warpage upwards: 6 mm - board thickness
downwards: 0.3 mm + PCB thickness
Clearance on board underside max. 40 mm
PCB transport height 830 mm ±15 mm (Standard)
900 mm ±15 mm (Option)
930 mm±15 mm (Option)
950 mm ±15 mm (Option SMEMA height)
Type of interface SMEMA (Standard)
SIEMENS (Option)
PCB weight 3 kg
Component-free PCB handling edge 3 mm
PCB changeover time 2.5 s
Conveyor mode synchronous or asynchronous
Components on each conveyor same or different
PCB width on each conveyor same or different
Ink spot recognition synchronous: not possible, asynchronous: Possi-
ble
Automatic width adjustment Possible
NOTICE
In the SR/MC station SW, the fixed conveyor side of all lanes can be adjusted in the conveyor
firmware (flexible). However, this may only be set with the SITEST software.
NOTICE
If you want to change the conveyor mode from "widened" to "extra wide" (or vice versa), you
need to first move the conveyor back into standard mode and then select the new mode.
12 Modular Conveyor
12.3.1 Setting the Fixed Conveyor Side (Single and Dual Conveyor) 12.3 Conveyor Settings
Student Guide SIPLACE D-Series (FSE) 221
SITEST – conveyor "options and configuration"
See also
12.3.1.1.1 To (1): Reference Position of Fixed Side [ ➙ 221]
12.3.1.1.2 To (2), (3): Advanced Conveyor Configuration [ ➙ 221]
12.3.1.1.3 To (3): Widening the Conveyor (Flexible Dual Conveyor for Single Conveyor Mode) [ ➙
221]
12.3.1.1.4 To (3): Converting the Single Conveyor Mode Back to Flexible Dual Conveyor Mode [ ➙
223]
12.3.1.1.5 To (2): Setting the Fixed Conveyor Side for "Extra Wide" Mode [ ➙ 223]
To (1): Reference Position of Fixed Side
▪ The fixed conveyor side can be changed via SITEST and set to "Right side fixed"/"Left side fixed" as
required.
▪ If the position of the fixed conveyor side which has been taught is saved, these values will be used
for the function Move all conveyor edges to standard position .
The default values will be overwritten and will need to be retaught.
▪ If these dimensions are incorrectly set on the single or dual conveyor, the PCB reference corner may
be moved, leading to fiducial errors during placement.
To (2), (3): Advanced Conveyor Configuration
Two requirements for changing the fixed conveyor sides:
▪ Extra wide conveyor: This moves the fixed conveyor side in D/Di-series machines 25 mm (D3: X ex-
tra wide 34 mm) outwards.
▪ Widen conveyor:This moves the conveyor sides of the 2nd conveyor to the limit switch
In single conveyor mode, lane 1 of D/Di-series machines can be set to widths of up to 380 mm (HF,
X, D3 lines up to 450 mm).
To (3): Widening the Conveyor (Flexible Dual Conveyor for Single Conveyor Mode)
► Select Option and configuration from the SITEST conveyor menu and then click on Widen conveyor
to widen the conveyor.
NOTICE
Art und Quelle der Gefahr
The menu (1) is protected with the SiPLACE Service password.