00195440-05-SG_D-Series_FSE-EN - 第27页

3 Overview 3.3.1 Machine Options 3.3 Possible Options for D/Di-Series Ma chines Student Guide SIPLACE D-Series (FSE) 27 ** No Coplan ILD 2200 if the mac hine is running with Single Box PC system 3.3 3 . 3 P o s s ib le O…

3 Overview

3.2 Machine Overview Comparison D1/D1i to D4/D4i 3.1.2 SIPLACE D4/D4i Configuration

26 Student Guide SIPLACE D-Series (FSE)

X-motor cooling Through fan

during compo-

nent pickup

Through ex-

haust from

C&P/TWIN

heads

Through fan during component pickup

Platine an der

X-Achse

Gantry head

distributor, ver-

sion 3

Head interface/

adapter

Gantry head distributor, version 3

Platine an der

Y-Achse

Gantry distribu-

tor

Gantry inter-

face

Gantry distributor

Placement head

type

C&P12 C&P12/6 PA1 /

C&P12/6 /

TWIN PA2

C&P12/6 C&P12/6 und

P&P

(= 1 TWIN

segment)

C&P12/6 or

P&P

(= 1 TWIN

segment)

C&P-Version DLM3

Max. component

height

6 mm C&P12: 6 mm

C&P6: 8.5 mm

TWIN: 25 mm

C&P12: 6 mm

C&P6: 8.5 mm

C&P12: 6 mm

C&P6: 8.5 mm

P&P: 19 mm

Conveyor 5-parts 3-parts

Conveyor control TSP 301 TSP 201

For dual conveyor With extension board Without extension board

SC BoxPC (or Sin-

gle BoxPC)

Currently with

computer rack

or box PC

BoxPC (or Single BoxPC)

Basic software SC/MC602 SC/MC603.01 SC/MC603.01

SP1

MC Micro Box PC

+ USB DVD-

LW (or incorpo-

rate into Single

BoxPC)

MC slot PC

(C086) or Box

+ USB DVD-

Micro Box PC

+ USB DVD-LW (or incorporate into Single Box-

PC)

MC operating sys-

tem

602 RMOS/603 WinXP/605

WinXPe

603 WinXP/605 WinXPe

USB hub 7-fold 4-fold 7-fach (od. 4-fach)

Axis controller

rack

2 racks with code switch 1 rack with code switch to standard

Axis controller A364 A363/A364 A364

Pneumatic

changeover table

docking unit

--- YES ---

No. changeover

table positions per

location

1 each STP 2 / STP1

Pos für D2

STP 1 pos D2 or D1

(Pos. D1 35 mm further outside

than D2)

Cutter HS version HF version Neu, verlängerte HS

Changeover table

S feeder

HF version Neu, verbreitert

Kopf-Modularität --- C&P12/6/

TWIN

C&P12/6 C&P12/6 with P&P

Bestückkopf/ Ser-

vo-Teile

No Same as X ma-

chine

C&P and P&P module

Designation D4/D4i D3 D2/D2i D1/D1i D1/D1i single

head

3 Overview

3.3.1 Machine Options 3.3 Possible Options for D/Di-Series Machines

Student Guide SIPLACE D-Series (FSE) 27

** No Coplan ILD 2200 if the machine is running with Single BoxPC system

3.3

3.3 Possible Options for D/Di-Series Machines

Possible Options for D/Di-Series Machines

3.3.1

3.3.1 Machine Options

Machine Options

Hardware - new features for C&P placement head

*) Assembly position at location 2: inside, on conveyor belt

Assembly position at location 4: outside, to make room for the component camera SST36 and the reject

container.

**)-No Coplan ILD 2200 if the machine is running with Single BoxPC system

HM-Teilesatz für

Kopfmontage

No --- Set for D-series

HM-Teilesatz für

Servos und PPW

YES

Kamera-

Modularität

SST28/SST29/

SST30/SST38

SST28/SST29/SST30/SST38 für C&P12

oder SST29/SST30 für C&P6

(also P&P on D1: SST36, optional SST33 und SST 25)

Temperature

compensation I

Both gantries in the placement area (PA) check

the PCB position.

Die LP-Kamera prüft IC/FC-

Kameraposition in definierten

Abständen

Temperature

compensation II

Temperature

sensor at C&P

gantries

Temperatur-

sensoren am

C&P-Portal/

TWIN IC/FC-

Kamera-

position prüfen

in definierten

Abständen

Temperature sensor at C&P gantries

FlipChip camera --- YES --- YES

Coplan ILD 2200 --- YES --- YES/No**

GEM option ---

Designation D4/D4i D3 D2/D2i D1/D1i D1/D1i single

head

Option D4/D4i D3 D2/D2i D1/D1i

Coplan ILD 2200 --- YES --- YES/NO**)

FlipChip camera SST25 --- YES --- YES

MTC2 --- Yes *) ---

WPC4 --- ab SC/MC 605 --- YES

Vacuum pump Possible

DIP module --- YES ---

Not with feeder

cover flap

YES

0201 set Yes, with SST 29 (Di with SST30 with 605.03 SP2)

01005 set From 04/2008 --- From 04/2008

Setup Center YES

Splice detection YES

3 Overview

3.4 Assemblies 3.3.2 Conveyor Options

28 Student Guide SIPLACE D-Series (FSE)

3.3.2

3.3.2 Conveyor Options

Conveyor Options

Conveyor equipment: Dual conveyor

Conveyor equipment: dual conveyor in single conveyor mode

Conveyor equipment: single conveyor

3.4

3.4 Assemblies

Assemblies