80S-15贴片机 - 第306页

9 Revolver Head SIPLACE 80S/F/G Service M anual Edition 04/97 9 - 22 Fig. 9.5.1 Modules of the “Lifting slide housing, com plete“

SIPLACE 80S/F/G Service Manual 9 Revolver Head

Edition 04/97

9 - 21

9.5 Description of the Lifting Slide Housing "Com-

plete"

The lifting slide housing has been designed in such a way that without any special mechanical setting

–

it can be removed from and fitted to the head mounting of the gantry (see Fig. 9.2.4).

–

it can be replaced as a completely mounted unit with the encoder housing and revolver head (see Fig.

9.2.4).

The lifting slide housing is centered by means of two parallel pins to the head mounting of the gantry and

there fastened with three hexagon socket-head screws (see Fig. 9.2.4). Two parallel pins in the lifting slide

housing center the encoder housing with revolver head, which itself is fastened with three hexagon socket-

head screws to the lifting slide housing (see Fig. 9.2.4).

The lifting slide housing "complete" basically consists of the following subassemblies (see Fig. 9.5.1):

–

Lifting slide housing

–

Vacuum generator block with 4 compressed air connections, each 5.6 bar

–

Silencer block with 4 silencers

–

Vacuum measuring board 1710460-Y0007

–

sz axis, consisting of:

●

16 mm lifting slide with 2 deep-grooved ball bearings for scanning the cam disk

●

Bero for interrogating whether the sz axis has reached the top end position.

●

Longitudinal guide of the lifting slide

●

sz axis drive with drive motor, tachometer and incremental rotary position transducer and cam disk

●

Segment claw for coupling the segment to the sz axis for die lifting and lowering movement

–

Screwdriver 1 for opening and closing the segment at the pick-up and placement of components in

revolver head station 1

BERO: interrogation screwdriver 1 and conversion board screwdriver/s 1 Y0307

–

Screwdriver 2 for opening and closing the nozzle at ejection of a component or checking a nozzle for

contamination in revolver head station 3

BERO: Interrogation screwdriver 2

–

Removable circular arc guide for the segments (link) and circular arc guide integrated into the lifting slide

housing

9 Revolver Head SIPLACE 80S/F/G Service Manual

Edition 04/97

9 - 22

Fig. 9.5.1 Modules of the “Lifting slide housing, complete“