80S-15贴片机 - 第386页

9 Revolver Head SIPLACE 80S/F/G Service Manual Edition 04/97 9 - 102 9.12.4 Fitting the placement head ● Reverse th e abov e sequenc e to inst all. PLEASE NOTE: Note the co ding o n the pl ugs when y ou reco nnect the co…

100%1 / 484
SIPLACE 80S/F/G Service Manual 9 Revolver Head
Edition 04/97
9 - 101
Fig. 9.12.3 Fitting the revolver head to the head support on the gantry
Key to Fig. 9.12.3
1 Cover 4 Parallel pins
2 M3 hexagon socket-head screw 5 Head support on the gantry
3 Placement head
1
2
5
4
4
2
2
3
9 Revolver Head SIPLACE 80S/F/G Service Manual
Edition 04/97
9 - 102
9.12.4 Fitting the placement head
●
Reverse the above sequence to install.
PLEASE NOTE:
Note the coding on the plugs when you reconnect the connectors on conversion board Y0005.
CAUTION
O
• Ensure that the cables are not damaged and that there is no strain on the clamped connections.
• Check that all the contacts of all connectors are seated correctly.
• Fix all the cables with cables ties once more.
9.12.5 Adjustments
●
Calibrate the placement head using the SITEST program.
●
Carry out the adjustments in accordance with the adjustment instructions.
SIPLACE 80S/F/G Service Manual 9 Revolver Head
Edition 04/97
9 - 103
9.13 Dismantling the encoder housing
9.13.1 Tools, equipment and consumables
9.13.2 Dismantling the encoder housing
DANGER
OOO
Switch the placement machine off at the main switch and disconnect from the power supply.
WARNING
OO
Switch the compressed air supply off at the stop valve on the compressed air unit.
●
Remove all the segments using the appropriate segment changing device and place the segments in the
segment case.
PLEASE NOTE:
Note the order of the segments and from which star position you removed the segments. In this way, you
will ensure that the configuration will be correct when you refit the segments.
or
●
Place the segment mount LTX over the individual segment guide shafts so that the segments cannot fall
off when the encoder housing is dismantled.
●
Remove the cable ties and detach the following plug-in connections
X9 X10 X22 X23 X24 and X25 X27
on board Y0005 (see Fig. 9.12.1 on page 9 - 98)
From item number
Set of hexagon socket-head screwdrivers
Diagonal cutter
SIPLACE segment changing device, version I 00310699-01
SIPLACE segment changing device, version II 00305897-02
Segment case 00302217-01
Segment mount LTX for the SIPLACE 80S-15/F3 revolver head 00306798-01
SITEST program
Adjustment instructions
Circuit diagrams
Cable ties