80S-15贴片机 - 第441页
SIPLACE 80S/F/G Service Manual 9 Revolver Head Edition 04/97 9 - 157 9.22 Servic e work o n the PCB camera 9.22.1 Tools, equipm ent and consum ables 9.22.2 Spare parts 9.22.3 Dismantling the PCB camera DANGER OOO Switch …
9 Revolver Head SIPLACE 80S/F/G Service Manual
Edition 04/97
9 - 156
SIPLACE 80S/F/G Service Manual 9 Revolver Head
Edition 04/97
9 - 157
9.22 Service work on the PCB camera
9.22.1 Tools, equipment and consumables
9.22.2 Spare parts
9.22.3 Dismantling the PCB camera
DANGER
OOO
Switch the placement machine off at the main switch and disconnect from the power supply.
●
Remove connector X1 of cable Y0577 (point 5 in Fig. 9.22.1) from terminal X1 on board Y0029.
●
Remove connector X3 (point 6 in Fig. 9.22.1) of the lens system lighting cable from terminal X2 on board
Y0029.
●
Remove connector X1 of the PCB camera cable Y0597 (see item 2 in Fig. 9.22.1) from the PCB camera
amplifier.
●
Dismantle the red retaining bracket.
●
Loosen the 4 M3 hexagon socket-head screws (see item 6 in Fig. 9.22.2) for fixing the PCB camera holder
(see item 5 in Fig. 9.22.2).
From item number
Set of hexagon socket-head screwdrivers
Diagonal cutter
Cable ties
SITEST program
Number in
Fig. 9.22.1.
From item number
PCB camera, type A (SIPLACE 80S, 80F, gantry 1)
1 and 8 02102978-01
PCB camera, type B (SIPLACE 80S, gantry 2)
1 and 8 00130380-01
Illumination control for the PCB camera
7 00301388-01
Cable: Pulnix camera conversion board Y0597
9 00305674-03
9 Revolver Head SIPLACE 80S/F/G Service Manual
Edition 04/97
9 - 158
Fig. 9.22.1 Plug-in connections on the PCB camera
Key to Fig. 9.22.1
1 PCB camera amplifier 5 Connector X1 on cable Y0577
2 Connector X1 on the PCB camera cable
Y0597
6 Connector X2 on the cable for the lens system light-
ing
3 Cable clip for the PCB camera cable 7 Illumination control for the PCB camera Y0029
4 Cable: Pulnix camera - conversion board
Y0597
8 PCB optical system and PCB illumination
8
2
5
3
6
1
7
4