80S-15贴片机 - 第444页

9 Revolver Head SIPLACE 80S/F/G Service Manual Edition 04/97 9 - 160 9.22.5 Replacing the ’Pulnix ca mera - conversion board Y0597’ cable DANGER OOO Switch th e placem ent mac hine off at the mai n switch and disc onnect…

100%1 / 484
SIPLACE 80S/F/G Service Manual 9 Revolver Head
Edition 04/97
9 - 159
Fig. 9.22.2 Fixing screws for the PCB camera
Key to Fig. 9.22.2
●
Loosen the four M3 hexagon socket-head screws for fixing the PCB camera to the holder (see item 7 in
Fig. 9.22.2).
●
Loosen the two M3 fixing screws (see item 8 in Fig. 9.22.2) for the PCB optical system and remove the
PCB camera system.
9.22.4 Reassembling the PCB camera
●
Reverse the above sequence to reassemble.
●
Use the SITEST program to carry out all the calibration steps required, such as calibrating the PCB cam-
era, measuring the PCB /component offset, etc.
1 Housing cover 5 PCB camera holder
2 PCB optical system and PCB illumination 6 4 x M3x6 hexagon socket-head screws
3 Connector X2 on the PCB lens system cable 7 4 x M3x4 hexagon socket-head screws
4 PCB camera amplifier 8 2 x M3 hexagon socket-head screws
4
5
1
2
3
8
6
7
9 Revolver Head SIPLACE 80S/F/G Service Manual
Edition 04/97
9 - 160
9.22.5 Replacing the ’Pulnix camera - conversion board Y0597’ cable
DANGER
OOO
Switch the placement machine off at the main switch and disconnect from the power supply.
●
Remove connector X1 of PCB camera cable Y0597 (see item 2 in Fig. 9.22.1) from the PCB camera
amplifier.
●
Loosen the cable clip (see item 3 in Fig. 9.22.2).
●
Loosen the cable ties on conversion board Y0005 and disconnect the plug from slot X23 (see item X23 in
Fig. 9.12.1 on page 9 - 98).
●
Attach the new cable.
●
Carry out a function test using the SITEST program.
9.22.6 Replacing the ’PCB camera illumination control’ board
DANGER
OOO
Switch the placement machine off at the main switch and disconnect from the power supply.
●
Disconnect the two plugs from slots X1 and X2 on board Y0029 (see items 5, 6 and 7 in Fig. 9.22.1).
●
Replace the board.
●
Insert the plug
–
of cable Y0577 into slot X1 and
–
of the cable for the lens system lighting into slot X2.
●
Carry out a function test using the SITEST program.
SIPLACE 80S/F/G Service Manual 9 Revolver Head
Edition 04/97
9 - 161
9.23 Service work on the component camera
9.23.1 Tools, equipment and consumables
9.23.2 Spare parts
9.23.3 Dismantling the component camera
DANGER
OOO
Switch the placement machine off at the main switch and disconnect from the power supply.
●
Remove connector X2 (see item 2 in Fig. 9.23.1) from the component camera.
●
Remove connector X1 (see item 3 in Fig. 9.23.1) from slot X3 on illumination control board Y0059.
From item number
Set of hexagon socket-head screwdrivers
Diagonal cutter
Cable ties
SITEST program
From item number
Vision system module, assembly
00309751S02