80S-15贴片机 - 第9页
SIPLACE 80 S/ F/G Service M anual 0 Introduction Edition 07/97 0 - 5 NOTE Please contact us at the followi ng addres s for mor e informa tion or if p articul ar problems crop up wh ich are not dealt with in eno ugh det a…
0 Introduction SIPLACE 80 S/F/G Service Manual
Edition 07/97
0 - 4
0.1.3 About the SIPLACE 80S Placement Machine
The SIPLACE 80S placement machine is a modularly designed high-performance placement system with
double gantry axes and two turret placement heads at each station. While one placement head picks up com-
ponents from the feeder modules, the other placement head inserts the components it has already picked up.
Vision systems for board position recognition and components centering also contribute to the high quality of
placement.
The line computer working with the UNIX operating system supplies the SIPLACE 80S machine with the data
it needs. It is also possible to link the machine via this line computer to a higher-level data processing system.
It is also possible to link the machine to input and output units, screen printing units and soldering ovens.
0.1.4 About the SIPLACE 80F
Placement Machine
The SIPLACE 80F placement machine is a modularly designed high-performance placement system with one
turret placement head and one IC head at the one gantry. First the components picked up by the turret head
are inserted and then the components picked up by the IC head.
Vision systems for board position recognition and components centering also contribute to the high quality of
placement.
The line computer working with the UNIX operating system supplies the SIPLACE 80F machine with the data
it needs. It is also possible to link the machine via this line computer to a higher-level data processing.
As an option, Wafflepack changers for furnishing components can also be installed.
It is also possible to link the machine to input and output units, screen printing units and soldering ovens.
0.1.5 The SIPLACE G Gluing Machine
The SIPLACE G operates with three adhesive application heads, two of which are used at the same time and
which apply glue simultaneously to the board.
The first gluing unit can be positioned in the y direction relative to the basic head with the aid of the additional
ky axis.
The second gluing unit can be positioned analogously in the x direction with the aid of the additional kx axis.
This design makes it possible for the two gluing units to be positioned independently of one another within the
preset limits and thus to operate simultaneously.
The third gluing unit is mounted on the main gantry. It is primarily used for placing particularly large glue spots
with the aid of a large glue nozzle or particularly small glue spots with the aid of a smaller nozzle.
SIPLACE 80 S/F/G Service Manual 0 Introduction
Edition 07/97
0 - 5
NOTE
Please contact us at the following address for more information or if particular problems crop up which are not
dealt with in enough detail in this service manual.
Siemens AG
PL EA 1 V 2 Service und Ersatzteile
Rupert-Mayer-Straße 44
D - 81359 München
Tel. +49-89-722-48642
Fax +49-89-722-24260
0 Introduction SIPLACE 80 S/F/G Service Manual
Edition 07/97
0 - 6