SM481_Service Manual - 第28页

设备规 格及名 称 5 SEC TION ITEM SPECI FICATION REMA RK Weigh t SM481 (Stan dar d equi pmen t) Appr ox. 1 ,680 kg HIG HT= 900mm ( Fee der 未包括 ) Appr ox. 1 ,740 kg HIG HT= 950mm ( Fee der 未包括 ) SM481 ( 1Standa rd Feeder base +1D…

100%1 / 332
Advanced High Speed Flexible Mounter
4
2.2. Basic Specifications of the Machine
SECTION
ITEM
SPECIFICATION
REMARK
External size
Width(W)
(a) 1,650 mm, (b) 1,990 mm, (c) 2,140 mm
(a) L460 mm, (b) L610 mm, (c) L660 mm
Depth(D)
(a) 1,680 mm, (b) 2,030 mm
(a) Including front/rear cover, (b) Including operation unit
Height(H)
PCB 高度 900 mm
(a) 1,530 mm, (b) 2,090 mm
(a) Including upper cover, (b) Including tower lamp
PCB 高度 950 mm
(a) 1,580 mm, (b) 2,140 mm
(a) Including upper cover, (b) Including tower lamp
环
境
条
件
Operation
Ambient temperature
10 ˚C ~ 35 ˚C
Recommendation
ambient temperature
24 ± 4 ˚C 设备运转条件
Humidity RH 30 % ~ RH 80 %
但，30℃以上时应该为 70%以下，维持设备温度以避免发生凝缩水
EMI / EMC
以
CE
为准
Place
平坦，设备运转时不会发生振动
Other
No harmful gas dust
Non
operation
Ambient temperature
-10 ~ 60
˚
C
Humidity RH 10 % ~ RH 90 %
但，35℃以上时湿球温度应该为 35℃以下，维持设备温度以避免发生凝缩水
耐震特性
移动设备时能维持设备状态
不能有零件掉落之类的情形发生
Other
No harmful gas dust
Air supply
Primary pressure
5.0~7.0 kgf/cm2
Dry and clean air
Secondary pressure
5.0 kgf/cm2
±
0.5 kgf/cm2
正面压力规的指示值
air consumption
50 Nl/min (Ejector Option
시
260 Nl/min)
2
次气压
5kgf/cm2
为准
Power Supply
Voltage
3phase AC 220±20V
3phase AC 200±18V / 208±19V / 220±20V /
240
±
22V / 380
±
25V / 415
±
28V
Possible by changing the transformer input terminal connection
Frequency
50/60 Hz
Power consumption
Max. 4.7 kVA
包括周边设备的运转
设备规格及名称
5
SECTION
ITEM
SPECIFICATION
REMARK
Weight
SM481
(Standard equipment)
Approx. 1,680 kg
HIGHT=900mm (Feeder 未包括)
Approx. 1,740 kg
HIGHT=950mm (Feeder 未包括)
SM481 (1Standard Feeder
base
+1Docking Option)
Approx. 1,660 kg
HIGHT=900mm (Docking cart , Feeder 未包括)
Approx. 1,720 kg
HIGHT=950mm (Docking cart , Feeder 未包括)
SM481 (Docking Option)
Approx. 1,640 kg
HIGHT=900mm (Docking cart , Feeder 未包括)
Approx. 1,710 kg
HIGHT=950mm (Docking cart , Feeder 未包括)
SM481S (Standard
equipment)
Approx. 1,630 kg
HIGHT=900mm (Feeder 未包括)
Approx. 1,690 kg
HIGHT=950mm (Feeder 未包括)
SM481S (Docking Option)
Approx. 1,600 kg
HIGHT=900mm (Docking cart , Feeder 未包括)
Approx. 1,680 kg
HIGHT=950mm (Docking cart , Feeder 未包括)
Advanced High Speed Flexible Mounter
6
2.3. Detail Specifications of the Machine
SECTION ITEM SPECIFICATION REMARK
General
Tact time
Under optimum
condition
0.095 seconds/component, Chip1608
(38,000 cph)
同时吸附基准, Flying vision
Component dump rate
1,000 ppm 以下, Chip1005 本公司选定的零件
2,000 ppm 以下, Chip0603 本公司选定的零件
SECTION
ITEM
SPECIFICATION
REMARK
General
Component
types
Flying vision
MEGA
FOV 24 mm
Chip
0402~□16 mm
□8 mm 以下: 支持所有贴装头
□8 mm 超过: 支持 H1, H3, H5, H7, H9
IC, Connector
□16 mm 以下, Lead pitch 0.4 mm 以上
BGA, CSP
□
16 mm
以下
, Ball pitch 0.4 mm
以上
Maximum height
Flying vision
10 mm
Upward vision
15 mm
SECTION
ITEM
SPECIFICATION
REMARK
General
Component
types
Upward vision
MEGA
FOV 35 mm
IC, Connector
□32 mm 以下, Lead pitch 0.3 mm 以上
□32 ~ □42 mm 分割识别
(Ball pitch 1.0 mm 以上, Lead pitch 0.5 mm 以上)
□42 ~ □55 mm 분할인식
(Ball pitch 1.0 mm 以上, Lead pitch 0.65 mm 以上)
BGA, CSP
□32 mm 以下, Ball pitch 0.5 mm 以上
Upward vision
MEGA
FOV 45 mm
IC, Connector
□42 mm 以下, Lead pitch 0.4 mm 以上
BGA, CSP
□42 mm 以下, Ball pitch 1.0 mm 以上
Upward vision
FOV 35 mm
IC, Connector
□32mm 以下, Lead pitch 0.4mm 以上
□32 ~ □42 mm 分割识别
(Ball pitch 1.0 mm 以上, Lead pitch 0.5 mm 以上)
□42 ~ □55 mm 分割识别
(Ball pitch 1.0 mm 以上, Lead pitch 0.65 mm 以上)
BGA, CSP
□32mm 以下, Ball pitch 0.75mm 以上
Upward vision
FOV 45 mm
IC, Connector
□42mm 以下, Lead pitch 0.5mm 以上