Brochure-PI-BAT_EN-Rev5-12-2017_LD - 第4页

Ziel Ziel Inspection without doubts Demand accuracy , not just repeatability Accuracy in production is about Z-referencing. All traditional SPIs set threshold (typically 40 µm) under which height and thus volume is no lo…

Inspect without eort

Let the machine program itself

Just scan a bare board, to ensure accurate

measurement, and let the machine program

itself.

With auto-programming, ne tuning is no

longer required. Performance is consistent,

regardless of color or nish variations. Thus, PI

is ideal for New Product Introduction.

PI is the only SPI to program automatically.

Auto-programming enables high quality inspection independently of

programmer’s skill level.

In addition to paste inspection, PI oers

simultaneous glue dot inspection.

Ziel Ziel

Inspection without doubts

Demand accuracy, not just repeatability

Accuracy in production is about Z-referencing.

All traditional SPIs set threshold (typically 40 µm)

under which height and thus volume is no longer

measured. As a result,volume is under estimated on

small pads, precisely when you need to know much

paste is truly deposited.

PI’s patented Z-referencing method leverages the

entire textured 3D board information, not just

cropped images around pads, to dene stable and

accurate Z-reference.

PI’s patended Z-referencing technology overcomes the limitation

of traditional SPIs and brings unprecedented

accuracy to paste volume measurement.

PI’s multi-frequency, multi pattern Moiré combined

with patented dual Z axis motion, oer unique wrap

compensation to deliver accurate measurements in

real production environments, with no false calls.

High resolution textured 3D images provide

unambiguous information for defect classication.

Inspektion mit eindeutigem Ziel Ziel Ziel

Inspect with a purpose

Control the print process to increase yield

Improve your process and set tolerances independently

of products with automatic pad grouping by AAR (Area

Aperture Ratio)

Understand your process with an extra-large review

image in textured 3D for easy diagnostic.

PI’s automatic pad grouping by AAR is just one the many features targeted

specically at process control. Combined with SIGMA Link software suite,

inspection data becomes actionable process information.

Monitor your process in real-time with SIGMA

Analysis - O-line SPC - or simply with PI’s

embedded SPC.