UR5_User_Manual_zh_Global - 第61页
. . B 声明和认证 B.1 CE Declaration of Incorporation (original) A ccording to Europ ean directiv e 2006/42/EC annex I I 1.B. The manufacturer Universal Rob ots A/S Energiv ej 25 5260 Odense S Denmark +45 8993 8989 hereb y dec…
A.1 0 类停机的停止距离和停止时间
UR5/CB3 I-48 版本 3.2 (rev. 18629).
.
版权所有 ©2009-2015 Universal Robots A/S。保留所有权利。
.
.B 声明和认证
B.1 CE Declaration of Incorporation (original)
According to European directive 2006/42/EC annex II 1.B.
The manufacturer Universal Robots A/S
Energivej 25
5260 Odense S
Denmark
+45 8993 8989
hereby declares that the product described below
Industrial robot UR5/CB3
Serial number
may not be put into service before the machinery in which it will be incorporated is declared in confor-
mity with the provisions of Directive 2006/42/EC, as amended by Directive 2009/127/EC, and with the
regulations transposing it into national law.
The safety features of the product are prepared for compliance with all essential requirements of Direc-
tive 2006/42/EC under the correct incorporation conditions, see product manual. Compliance with all
essential requirements of Directive 2006/42/EC relies on the specific robot installation and the final risk
assessment.
Relevant technical documentation is compiled according to Directive 2006/42/EC annex VII part B and
available in electronic form to national authorities upon legitimate request. Undersigned is based on the
manufacturer address and authorised to compile this documentation.
Additionally the product declares in conformity with the following directives, according to which the
product is CE marked:
2006/95/EC — Low Voltage Directive (LVD)
2004/108/EC — Electromagnetic Compatibility Directive (EMC)
2011/65/EU — Restriction of the use of certain hazardous substances (RoHS)
A complete list of applied harmonized standards, including associated specifications, is provided in the
product manual. This list is valid for the product manual with the same serial numbers as this document
and the product.
Odense, May 1
st
, 2015
.
.
R&D
.
.
Lasse Kieffer
.
Global Compliance Officer
版本 3.2 (rev. 18629).
.
版权所有 ©2009-2015 Universal Robots A/S。保留所有权利。
I-49 UR5/CB3
B.2 CE 公司声明
B.2 CE 公司声明
根据欧洲指令 2006/42/EC 附件 II 1.B.
制造商 Universal Robots A/S
Energivej 25
5260 Odense S
Denmark
+45 8993 8989
兹声明所有下述产品
工业机器人 UR5
序列号 （参见原文）
整合进的机器必须声明符合指令 2006/42/EC（由指令 2009/127/EC 修订）的规定，也必须符合相关的
国家法规，否则不得整合进该机器。
该产品的安全特征在正确整合的情况下满足指令 2006/42/EC 的所有要求，详见产品手册。是否符合指
令 2006/42/EC 的所有要求取决于具体的机器人安装设置和最终风险评估。
相关技术文档根据指令 2006/42/EC 附件 VII B 部分编撰，在合理要求下可向国家有关当局提供电子版
本。下述签名者在制造商的地址经授权编撰本文档。
此外，产品声明符合下述指令，产品根据这些指令贴上 CE 标识：
2006/95/EC — 低压指令 (LVD)
2004/108/EC — 电磁兼容性指令 (EMC)
2011/65/EU — 特定危险物质禁用指令 (RoHS)
所有参照的协调标准的清单，包括相关的规定，请详见产品手册。该清单适用于所有序列号与本文档及
本产品相同的产品手册。
Odense, 2015 年 5 月 1 日
.
.
R&D
.
.
Lasse Kieffer
.
全球合规官
UR5/CB3 I-50 版本 3.2 (rev. 18629).
.
版权所有 ©2009-2015 Universal Robots A/S。保留所有权利。