00198171-02_Technical_Training_FSE_TX-Series_EN - 第31页
3 Setting Up the Machine 3.3 Setting up the TX Machine – Tools Technical Training FSE SIPLACE TX-Series 01/2018 31 3.3 Setting up the TX Machine – Tools TX series Tools Number Torque wrench 100 Nm to 400 Nm Setting 130Nm…
3 Setting Up the Machine
3.2 Setting up the TX Machine - Calibrations
30 Technical Training FSE SIPLACE TX-Series 01/2018
3. Select calibration items 1-4(1).
For machines using the hardware option Va-
cuum tooling: Select also Vacuum tooling
(1a).
Click Next (2).
Note
Function Multistep calibration is only avail-
able for TX micron 15µm and 20/25 µm ma-
chines.
Multistep calibration replaces the previously
available board mapping and head mapping.
In this context Multistep calibration is not re-
quired for setting up the machine.
4. Select both Gantries (1).
Click Start (2).
5. Click Accept to save data.
NOTICE
Accuracy of TX micron machines have to be checked
After TX micron machines are setup and calibrated, the accuracy of the machines have to
be checked using the ACT tool. For detailed information refer to the ACT tool manual (order
number 00196351-xx).
3 Setting Up the Machine
3.3 Setting up the TX Machine – Tools
Technical Training FSE SIPLACE TX-Series 01/2018 31
3.3 Setting up the TX Machine – Tools
TX series
Tools Number
Torque wrench 100 Nm to 400 Nm Setting 130Nm required. 03122973-xx
Tool holder for reversible ratchet 800mm 03122976-xx
Attachable ratchet 3/4 inch 14x18 03122977-xx
Extension 1/2 inch 03080499-xx
Allen Key bit SW19x85mm 3/4 inch 03122975-xx
UVEX bump cap SHORT 03122979-xx
Hexagonal screwdriver bit, size 14 Standard tooling
Open-end wrench 18 mm Standard tooling
Shaft spirit level (accuracy 0.02 mm/m), 00353825-xx
Only Micron
ACT case(standard) TX micron 20 / 25µm 03072228-xx
Accuracy Checking Tool ACT 03068036-xx
Mapping plate, single set, cpl. 03056448-xx
ACT adhesive tape 03071883-xx
Ceram Pads 2x2mm (TAPE) 00359505-xx
User Man. Accuracy Checking Tool, DE+EN 00196351-xx
ACT case TX micron 15µm xxxxxxxx-xx
Accuracy Checking Tool ACT 15µm xxxxxxxx-xx
ACT-Plate TX micron xxxxxxxx-xx
Adhesive foil ACT TX micron xxxxxxxx-xx
Ceramic pads 2x2mm unfurl 00359505-xx
ACT-paket TX2i micron 15µm
●
ACT-test-dummy 250x100x3
●
ACT-paket complete TX2i micron 15µm
03156157-xx
●
03156158-xx
●
03156305-xx
VakTool ACT SP1 complete 03156327-xx
VakTool ACT SP2 complete 03156332-xx
Pipette Typ 4204/6204 complete ceramic 03149000-xx
Nozzle magazine type 40xx 03101503-xx
Pipette 2204 complete ceramic 03153518-xx
Nozzle magazine type 20xx 03066107-xx
3.4 Excercise: Setting up the machine
1. Which answer is incorrect relating to machine delivery and setup?
A The two component tables are packaged with the TX machine in one box.
B To move the machine the forklift truck can lift and move machine by any orientation.
C TX machine transport height: 900mm to 950mm ± 15mm.
D The first 4 items in the “automatic calibration” GUI should be calibrated after machine install-
ation.
3 Setting Up the Machine
Room for Your Sketches and Notes
32 Technical Training FSE SIPLACE TX-Series 01/2018
Room for Your Sketches and Notes