SU_UM_TME20822_EN.pdf - 第2页
Legal Informa tion The APC brand and any trademarks of S chneider Electric SE and its subsidiaries referred to in this gui de are t he property of Schneider Electr ic SE or its subsidiaries. All other brands may be trade…
Smart-UPS™ Uninterruptible Power Supply
2200/3000 VA,
Rack-Mount 2U, with Lithium-Ion batteries
User Manual
SMTL2200RMI2UC/SMTL2200RMI2UCNC
SMTL3000RMI2UC/SMTL3000RMI2UCNC
EN TME20822
08/2023
Legal Information
The APC brand and any trademarks of Schneider Electric SE and its subsidiaries referred to
in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands
may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for
informational use only. No part of this guide may be reproduced or transmitted in any form or
by any means (electronic, mechanical, photocopying, recording, or otherwise), for any
purpose, without the prior written permission of APC.
APC does not grant any right or license for commercial use of the guide or its content,
except for a non-exclusive and personal license to consult it on an "as is" basis. APC
products and equipment should be installed, operated, serviced, and maintained only by
qualified personnel.
As standards, specifications, and designs change from time to time, information contained
in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by APC
and its subsidiaries for any errors or omissions in the informational content of this material
or consequences arising out of or resulting from the use of the information contained herein.
3
Important Safety Instructions
Smart-UPS SMTL 2200/3000 RMI2UC/RMI2UCNC
EN TME20822 – 08/2023
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important instructions that
should be followed during installation and maintenance of the UPS and batteries.
This is the “Read user manual” symbol. Read the user documentation to
become familiar with the equipment.
Read these instructions carefully and look at the equipment to become familiar with
the device before trying to install and operate it.
The following special messages may appear throughout this bulletin or on the
equipment to warn of potential hazards or to call attention to information that clarifies
or simplifies a procedure.
The addition of this symbol either to a “Danger” or “Warning” safety label
indicates that an electrical hazard exists that will result in personal injury if
the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
Product Handling Guidelines
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTI CE
NOTICE is used to address practices not related to physical injury.
Electrical equipment should be installed and operated only by qualified personnel. No responsibility is assumed by
Schneider Electric for any consequences arising out of the use of this material.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb