00193854-0402_AI_LBO_HS60-D4_DE EN - 第40页
2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4 HS-60 / D4 "Long Board Option" 05/2007 Edition 40 2.5 Sof tware 2.5.1 SITEST : Switch to the SITEST program. : Select “Conveyor” –> “P…
HS-60 / D4 "Long Board Option" 2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4
05/2007 Edition
39
The PCB lengths that can be set are: 610 mm, 580 mm, 550 mm and 515 mm. 2
2
2
: Switch the placement machine on at the main switch.
2
2
640 mm (272 mm)
670 mm (302 mm)
610 mm (242 mm)
510 mm (142 mm)
Stopper positions (the figure in brackets is the offset from the original stopper)
2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4 HS-60 / D4 "Long Board Option"
05/2007 Edition
40
2.5 Software
2.5.1 SITEST
: Switch to the SITEST program.
: Select “Conveyor” –> “PCB conveyor”.
: Change the transport mode: Select “Long PCB with additional stopper” and confirm your sel-
ection.
: Start the station software.
2.5.2 Line computer
: Load the options from the CD-ROM.
: In the station configuration / component editor, activate “Long PCB” under PCB conveyor.
2
HS-60 / D4 "Long Board Option" 2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4
05/2007 Edition
41
: Enter the placement offset (= distance old stopper – new stopper).
Press “Enter” to confirm.
A blue flag with the offset value then appears on the output conveyor in the machine display on
the desktop. 2
2
2
A large PCB must be programmed with a correspondingly large number of fiducials (up to 6 per
fiducial set). 2
2
2
2
2
2
2
2
2
2
2
2
2
2
Blue flag