00195779-0102_UM_D4_SR605_EN - 第140页
3 Technical data for the machine User manual SIPLACE D4 3.10 Component trolley From software version SR.605.xx 07/2008 EN Edition 140 It is easy to fit. The co mpressed air distr ibutor (item 1 in Fig . 3.10 - 5 ) is fas…
User manual SIPLACE D4 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.10 Component trolley
139
3.10.4.1 Tape reel diameter in relation to the PCB conveyor height
3
3.10.5 External power supply for component trolley
Item no. 00119029-xx External power supply, CO trolley
Item no. 00119030-xx Extension cable, main power supply
To keep the time required for a setup change as short as possible, component trolleys can be set
up in advance at a special external location. The feeder module functions and setting can be
checked there to prepare for use. We provide an external power supply for this purpose. The com-
ponent trolley with the required electrical power and compressed air is supplied via a connecting
cable.
3.10.5.1 Technical data
The kit contains a main power cable to European standards, a main power cable to US standards
and a connecting cable between the power supply and the component trolley.
3.10.6 Compressed air supply for bulk case feeder modules
Item no. 00119028-xx Bulk case compressed air distributor
Bulk case feeder modules require compressed air in order to work. A compressed air supply for
bulk case feeder modules is therefore available as an option.
Option –
With support for 3rd tape
reel
PCB conveyor height
of the component trolley
Tape reel diameter Tape reel diameter
830 mm 17" 15"
900 mm 19" 17"
930 mm 19" 17"
950 mm 19" 19"
Main power voltage 230 VAC ± 5 %
120 VAC ± 5 %
Compressed air connection Max. 1.0 MPa (10 bar)
Output pressure Can be adjusted with pressure regulator
3 Technical data for the machine User manual SIPLACE D4
3.10 Component trolley From software version SR.605.xx 07/2008 EN Edition
140
It is easy to fit. The compressed air distributor (item 1 in Fig. 3.10 - 5) is fastened to the component
table (item 3 in Fig. 3.10 - 5
) with two screws (item 2 in Fig. 3.10 - 5). The distributor is then con-
nected to the compressed air supply of the component trolley. The distributor has retaining clips
on the back (item 4 in Fig. 3.10 - 5
). They fix the bulk case feeder modules to the component table
and thus ensure a perfect compressed air supply.
3
Fig. 3.10 - 5 Compressed air supply for bulk case feeder modules
(1) Compressed air distributor
(2) DIN 912 screw, M8x20, 2x
(3) Component table
(4) Retaining clamps
User manual SIPLACE D4 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.10 Component trolley
141
3.10.7 Reel holder for the middle tape reel on 3 x 8 mm S feeder modules
Item no. 00119896-xx Adapter plate, CO trolley D4
Item no. 00141204-xx Tape reel holder, 3 x 8 mm feeder module, V2
Type 3 x 8 mm S feeder modules transport components to the pick-up position on three feeder
tracks. The tape reels for the two outer tracks are located between the dividing plates in the tape
container. The middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1 in Fig. 3.10 - 6
) and
– for every two feeder modules, 1 tape reel holder (item 2 in Fig. 3.10 - 6
)
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape reel
holders are inserted into the square openings in the adapter plate.
Fig. 3.10 - 6 Reel holder for the middle tape reel on 3 x 8 mm S feeder modules
(1) Adapter plate
(2) Tape reel holder