00195779-0102_UM_D4_SR605_EN - 第187页
User manual SIPLACE D4 4 Setting up and commissioning From software version SR.605.xx 07/2008 EN Edition 4.4 A dapting the component tro lley to the PCB conveyor height 187 4.4.6 930 mm PCB conveyor height 4 Fig. 4.4 - 6…
4 Setting up and commissioning User manual SIPLACE D4
4.4 Adapting the component trolley to the PCB conveyor height From software version SR.605.xx 07/2008 EN Edition
186
4
Fig. 4.4 - 5 Component trolley: PCB conveyor height 900 mm - front view, position of the hexagon socket head
screws
(1) Hexagon socket head screw M6x12 and washer (4x on the rear panel)
User manual SIPLACE D4 4 Setting up and commissioning
From software version SR.605.xx 07/2008 EN Edition 4.4 Adapting the component trolley to the PCB conveyor height
187
4.4.6 930 mm PCB conveyor height
4
Fig. 4.4 - 6 Component trolley: PCB conveyor height 930 mm - back view, position of the hexagon socket head
screw and check hole
(1) Hexagon socket head screw M6x12 and washer (4x on the rear panel)
(2) Sticker with the heights 830, 900, 930 and 950 mm for the check holes
(3) 4 check holes for checking the preset height. The selected height is preset correctly if the
check hole is not covered by the vertical profiled beam (item 4) (see arrow in the figure)
(4) Vertical profiled beam
(5) Jumper
4 Setting up and commissioning User manual SIPLACE D4
4.4 Adapting the component trolley to the PCB conveyor height From software version SR.605.xx 07/2008 EN Edition
188
4
Fig. 4.4 - 7 Component trolley: PCB conveyor height 930 mm - front view, position of the hexagon socket head
screws
(1) Hexagon socket head screw M6x12 and washer (4x on the rear panel)