00198586-02_JC_PMWF2_TX_V2_EN - 第2页
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violat…
www.asm-smt.com
Preventive Maintenance Workflow 2
SIPLACE TX-Series V2
Job Card
Edition 05/2021 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties
for their own purposes could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Straße 44
81379 Munich
Germany
Item no.: 00198586-02
www.asm-smt.com Printed by ASM Assembly Systems
www.asm-smt.com
Introduction
Safety Introduction
Equipment required for Workflow 2 Maintenance TX V2
1 Check the head status of the C&P20x to be maintained
2 Shut down, remove all tables (COT) and exchange all nozzles
3 Empty and clean the reject bin
4 Remove the C&P20x to be maintained
5 Return a maintained C&P20x
6 Clean the Z-Axis of the remaining C&P20x heads
7 Check and clean the magnetic surfaces and scale of X and Y-Axis
8 Clean the conveyor, lifting tables and gantry cables
9 Clean the fiducial bars (TX V2 micron and HD only)
10 Clean the stationary camera (CPP/ TH)
11 Clean the feeder modules and cut the tapes
12 Switch on the machine and return the tables (COT)
13 Calibrate the maintained C&P20x
14 Check the cover fans
15 Check the filter discs of all C&P20x
16 Check the nozzle status of all C&P heads
17 Endurance run
Table of Contents