KE2040 Instruction Manual_ver1.30.pdf - 第168页

4 – 66 4.7.2.1 Exampl es of component dimensi ons See the f ollowing figur es to create dat a. The dimensions and shape of each type of component are shown below . • Square chip • MEL F (horizontal) (horizontal)

4 – 65

④ Outer dimensions (Width, Length)

Enter the component width and length, using the formula bar.

Input range: 0.01 mm to 150.00 mm

⑤ Outer dimensions (Height)

Enter the component height using the formula bar.

Input range: 0 to 25.00 mm

⑥ Other

Pick depth

Enter the distance from the side picked up with a nozzle to the top of the

projection of a component with using the formula bar.

Input range: 0 to 25.00 mm

The default value is “0”. Entry to this item may be required for a

component whose surface is not flat such as a connector.

Normally the default value can be applied to this item.

4 – 66

4.7.2.1 Examples of component dimensions

See the following figures to create data.

The dimensions and shape of each type of component are shown below.

• Square chip

• MELF

(horizontal)

4 – 67

• Aluminum electrolytic capacitor

• SOT

(horizontal)