KE2040 Instruction Manual_ver1.30.pdf - 第700页

9 − 62 9.6.3 Component verification W hen you select the [Others] command on the [Ctrl] menu, then the [CVS control ] command, t he following “CVS cont rol” dialog box appears on the screen. Figure 9.6. 3 CVS control dia…

9 − 61

The state display of each unit is updated when the unit is controlled completely.

9 − 62

9.6.3 Component verification

When you select the [Others] command on the [Ctrl] menu, then the [CVS control]

command, the following “CVS control” dialog box appears on the screen.

Figure 9.6.3 CVS control dialog box

(1) Control item

Select a control item with the corresponding radio button.

(2) Control button

Execute the selected control item with its control button.

The display of the control buttons varies depending on the control item you

selected.

9 − 63

1) Probe

This item turns on and/or off the probe.

- When the control item “Probe” is checked, click the <ON>, <OFF>, or

<ON/OFF> button or press the F3, F4or F5 key to control the probe.

The state display is updated when the probe is controlled completely.

2) Meas. of capacitor

This item measures the capacity of a capacitor component.

- When the control item “Meas. of capacitor” is checked, click the

<Measurement> or <Mode> button, or press F3 or F4 key to control

measurement of a capacitor.

The state display is updated at end of control.

3) Meas. of diode

This item measures the capacity of a diode component.

- When the control item “Meas. of diode” is checked, click the

<Measurement> or <Mode> button, or press F3 or F4 key to control

measurement of a capacitor.

The state display is updated at end of control.

4) Meas. of resistor

This item measures the capacity of a resistor component.

- When the control item “Resistor measurement” is checked, click the

<Measurement> or <Mode> button, or press the F3 or F4 key to control

measurement of a resistor.

The state display is updated when the capacity of a resistor is

measured.

(3) State display

The state of each unit is displayed when the unit is controlled completely.

☞