00196803-02_VD_SIPLACE_Pro_9.3_DE EN.pdf - 第44页
Software Version sbeschreibun g Programmiersy stem SIPLACE Pro 9.3 Software Version Description Programming Sys tem SIPLAC E Pro 9.3 44 4.15 Show head step s in 3D The Recipe-Ana lyzer allows viewing th e optimized head …
Software Versionsbeschreibung Programmiersystem SIPLACE Pro 9.3
Software Version Description Programming System SIPLACE Pro 9.3
43
4.8 Setup names
The way in which setup names for jobs or SiCluster jobs are formed can be individually set. The
names are either derived from the name of the initial setup or from the name of the job/cluster job.
This setting is offered in a new tab in the optimizer parameters dialog.
4.9 Multiple selection in the optimizer toolkit tables
Entries and settings now affect all selected lines. This makes work with recurring entries easier. The
cells, lines or columns can be selected with the standard Windows functions (mouse and Ctrl key).
4.10 Flexible feeder type use of 8 mm X and 2x8 mm X
From SIPLACE Pro 9.3 onwards, the station allows you to use similar feeder types without the need to
modify the setup accordingly in the programming system. For example, it supports not only the
2x8 mm X feeder but also the 8 mm X feeder.
Note
In this case, you can only accept the modified feeder pitch and the angle in the
SIPLACE Pro database when uploading feeder data.
Other feeder data, such as offsets, pickup position (PuP) and feeder speed can only be
accepted if the setup concerned is described as it has been actually configured.
4.11 More than 255 fiducials
More than 255 different fiducials can now be described in SIPLACE Pro, although machines with
station SW versions 505 (and earlier) only support fiducials with numbers less than 256.
Fiducials which are not within the number range 1-255 are only supported by machines with SIPLACE
Vision systems i.e. all machines with station SW 60x and higher.
4.12 Operating modes I-Placement and board barcode
The placement mode I-Placement (or virtual I-Placement) can now also be used in board barcode
mode.
4.13 Select target folder for sub-objects when copying
When copying, e.g. a setup, the target folder can be selected for the tables to be copied. This also
applies to a component and the component shape to be copied plus to a board and the placement lists
to be copied.
4.14 Selection of column width in reports
The column width for the data shown in the report is now automatically calculated, although it can also
be manually calculated, increased or reduced in size as required.
Software Versionsbeschreibung Programmiersystem SIPLACE Pro 9.3
Software Version Description Programming System SIPLACE Pro 9.3
44
4.15 Show head steps in 3D
The Recipe-Analyzer allows viewing the optimized head steps in a 3D view. This view can be
accessed using the symbol of the Recipe-Analyzer’s Head Steps tab.
Software Versionsbeschreibung Programmiersystem SIPLACE Pro 9.3
Software Version Description Programming System SIPLACE Pro 9.3
45
5 Previous version functions for SIPLACE Pro 9.2
Notes
The previous versions SIPLACE Pro 9.0 and 9.1 have not been released. For features
of earlier versions please see the document “SIPLACE Pro Feature Description
Version 4.x to V8.x”, available via "Start / Programs / SIPLACE Pro / Documentation".
5.1 New Stations and Tables
Object Type
Name
Description
Station types
CA3
CA4
New Chip Assembly with SIPLACE Wafer
System (SWS)
DX1
DX2
DX4
One gantry
Two gantries
Two working areas with two gantries each,
equipped with a single or dual conveyor.
X4T
X4IT
Placement machine X4 or X4I with overwidth
dual conveyor
Table types
DX Table 34 X
Fixed table with 34 tracks, start track always
uneven (1, 3, 5, …)
DX Table WPC 60 X
Fixed table for WPC
DX Table 40 X
Fixed table with 40 tracks, can also be used
for LED placement on station type X4, start
track always uneven (1, 3, 5, …)
DX Table 60 X
Fixed table with 60 tracks, start track always
uneven (1, 3, 5, …)
DX Change Over Table 34 X
Changeover table with 34 tracks, start track
always uneven (1, 3, 5, …)
DX Change Over Table WPC 60 X
Changeover table for WPC
DX Change Over Table 40 X
Changeover table with 40 tracks, can also be
used for LED placement on station type X4,
start track always uneven (1, 3, 5, …)
DX Change Over Table 60 X
Changeover table with 60 tracks, start track
always uneven (1, 3, 5, …)
5.2 New Components
Object Type
Name
Description
Head
C&P 12 3xxx
New Revolver Head 12 (DLM4) for the station
types DX1, DX2
Evaluation
systems
RV Camera X (28) 24.2x24.2
RV Camera X (29) 32x32
RV Camera (30) 32x32
For the Revolver Head 12 (DLM4)
C&P 12 3xxx on DX1, DX2
RV Camera (30) 32x32
Note
The "RV Camera (30) 32x32" camera is the new standard camera for the CPP
head.
By means of the "Component Shape and Fiducial Upgrade Tool" the camera 30 can
be added in all component shapes for which the camera 29 is entered as camera.
All existing Vision data of the previous standard camera will be kept.