00198371-01_UM_SWS-EN - 第12页
1 Introduction User manual SIPLACE Wafer System (SWS) 1.1 Overview Edition 04/2018 12 1.1.2 Serial number of the SIPLACE W afer System The serial number is located on the mag azine lift, on the inside of th e SIPLACE W a…
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
11
1.1.1 SIPLACE CA4 V2 with SWS
Various changes in hardware and software now make it possible to operate the SIPLACE CA4 V2
with the SIPLACE Wafer System (SWS).
The placement machine can be fitted with an SWS at one of the four locations, so that so-called
dies can be placed from wafers. This makes the components (dies) directly available to the place-
ment head, in wafers. Up to four SWS can be used with the SIPLACE CA4 V2. The SIPLACE CA4
V2 can also be operated with a combination of SWS and changeover tables or without an SWS
and with four changeover tables at the locations.
To ensure access to the installed SWS in the machine, a sliding cover has been fitted to the side
of each machine location.
For details, see the user manual for the SIPLACE CA4 V2, German [item no.: 00198381-xx], En-
glish [0198382-xx].
1
Fig. 1.1 - 3 SIPLACE CA4 V2 placement machine with one SIPLACE Wafer System (SWS)
(1) SIPLACE CA4 V2
(2) SIPLACE Wafer System (SWS) at location 2
(T) Direction of PCB transport
(1)
(2)
1 Introduction User manual SIPLACE Wafer System (SWS)
1.1 Overview Edition 04/2018
12
1.1.2 Serial number of the SIPLACE Wafer System
The serial number is located on the magazine lift, on the inside of the SIPLACE Wafer System.
1
Fig. 1.1 - 4 Position of typeplate with serial number
(1) Typeplate
(1)
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
13
1.1.3 EC Declaration of conformity
The product described below:
1
Manufactured by
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
conforms to the regulations and standards listed in the EC Declaration of
Conformity provided.
1.1.4 Use as prescribed
The product may only be used for the areas of application specified in the catalogs and technical
descriptions i.e. for the placement of components and may only be used together with the third
party devices and components recommended or approved by ASM Assembly Systems GmbH &
Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
Product
SIPLACE Wafer System
Type SWS 1/3 SWS 2/4
Item no.: 03076752-xx 03076751-xx