00198371-01_UM_SWS-EN - 第29页
User manual SIPLACE Wafer System (SWS) 1 Introduction Edition 04/2018 1.3 Qualification and training of personnel 29 1.3 Qualification and training of personnel Personnel used for opera tion, preventive maintena nce, ins…
1 Introduction User manual SIPLACE Wafer System (SWS)
1.2 Description of functions Edition 04/2018
28
1
Fig. 1.2 - 11 Positions flip head/die attach segment
The transfer position of the flip head, the pick up and discharge position, as well as the transfer
position of the die attach segment to the placement head.
75°
Flipper transfer position
105°
Die attach transfer position
230°
Air kiss position die attach
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.3 Qualification and training of personnel
29
1.3 Qualification and training of personnel
Personnel used for operation, preventive maintenance, inspection and installation must hold the
relevant qualifications for the job. The user must keep tight control over their responsibilities, as-
signment and supervision. Any employee who does not have the relevant training must be trained
and given appropriate instruction. The instruction is to be given by trained and authorized person-
nel.
1
PLEASE NOTE
Operation of system only by qualified personnel
Only appropriately qualified staff may start up, operate or otherwise work on the ma-
chine.
The qualification must be proven by means of training courses or instruction for the per-
sonnel.
1 Introduction User manual SIPLACE Wafer System (SWS)
1.4 Operator levels Edition 04/2018
30
1.4 Operator levels
Certain functions or menus may only be executed or accessed by specially trained personnel. A
differentiation is made between the following operator levels:
– Production
– Advanced production
–Service
The operator levels "Advanced production" and "Service" can be password protected.
Production
This operator level includes those people who have been trained to operate the machine. These
people are authorized to use any functions associated with operating the machine and may call
up any menus needed to use the machine.
Advanced production
People with this operator level have completed special training and are authorized to perform
setup tasks e.g. creating setup configurations or determining Vision parameters etc.
Machine service
People with this operator level are specially trained technicians at the customer end, who can, for
example, define machine option settings.