00198371-01_UM_SWS-EN - 第83页
User manual SIPLACE Wafer System (SWS) 4 Setting up and commissioning Edition 04/2018 4.1 Delivery confi guration and transpo rtation of SWS 83 4 Setting up and commissioning 4.1 Delivery configuration and transport atio…
3 Technical data and assemblies User manual SIPLACE Wafer System (SWS)
3.4 Description of the SWS modules Edition 04/2018
82
3
Fig. 3.4 - 12 Main gripper modules (location 1,3)
(1) Gripper (2) Toothed belt axis
(3) Insertion location for barcode scanner
(optional)
(4) AD-MOT board
(5) Motor with coupling
1
2
4
5
3
User manual SIPLACE Wafer System (SWS) 4 Setting up and commissioning
Edition 04/2018 4.1 Delivery configuration and transportation of SWS
83
4 Setting up and commissioning
4.1 Delivery configuration and transportation of SWS
4.1.1 Shipping packaging
Within Europe the SIPLACE Wafer System is transported on a wooden pallet and is wrapped in
plastic foil. Outside Europe, the SIPLACE Wafer System is supplied in a wooden crate mounted
on a stable wooden pallet.
4.1.1.1 Dimensions of transportation packaging
The dimension of the wooden transport crate are as follows:
Length 1700 mm
Width 1250 mm
Height 1600 mm
4
4
Fig. 4.1 - 1 Transport crate SWS - dimensions in millimeters
4.1.1.2 SIPLACE Wafer System weight when ready for dispatch
The following table contains the weights of the SIPLACE Wafer System prepared for dispatch, in-
cluding packaging.
fork-lift attachment
point
Dispatch within Europe Dispatch overseas
SIPLACE Wafer System 390 kg 473 kg
4 Setting up and commissioning User manual SIPLACE Wafer System (SWS)
4.1 Delivery configuration and transportation of SWS Edition 04/2018
84
4.1.2 Transporting the SWS in a crate
4.1.2.1 Services
One of the services provided by ASM Assembly Systems GmbH & Co.KG is the complete inte-
gration of SIPLACE CA4 V2 into your production line. With our extensive expertise and by using
the right tools and equipment, we can ensure that the installation process runs smoothly and effi-
ciently. However, this will require you to clarify the infrastructure aspects in advance and make any
necessary changes at your production facility.
Please note that the safest way to transport the SIPLACE Wafer System is always in the transport
crate - or at the very least on the pallet. This will prevent serious damage to the SIPLACE Wafer
System caused by the feet colliding with obstacles, for example.
4.1.2.2 Safety instructions
4
4
4
4.1.2.3 Means of transport
To transport the SWS on the wooden pallet or in the transport crate, use a fork-lift truck with the
following specifications:
Fork length: Min. 1800 mm
Carrying power: Min. 1500 kg
Clear width between forks: Min. 420 mm 4
WARNING
Observe the applicable accident prevention regulations!
The applicable accident prevention regulations concerning the transportation of
heavy goods must be followed.
WARNING
Risk of tilting!
This risk of tilting occurs if the required specifications for the means of transportation are
not observed (section 4.1.2.3
)!
Always use the specified means of transportation.
WARNING
DANGER OF CRUSHING!
Risk of feet being crushed during transportation of the SIPLACE Wafer System.
Wear special protective shoes.