OPERATING MANAUAL(FOR ENGINEERS) - 第100页
Page 5-4 Board Recognition T eaching 5-2-3 Creating Procedure Check that “Board recognition” for the data created by PT100 is turned on before board recogni- tion. 1 . Display the main menu screen and send the board data…
Page 5-3
TEACHING
5
Enter board data
Enter board recognition data
Start teaching
Set lamp value
Recognition
Save data
Recognition test
Print teaching coordinates
Correct board recognition data
When using CAD data, this operation is
unnecessary.
End of teaching
5-2 Teaching the Board Recognition
5-2-1 Board Recognition
This equipment has the function to correct the deviation between board and print pattern before
mounting, and mount. This function learns the position by recognizing the mark set on the print
pattern and it is accomplished by comparing the position with the original position.
5-2-2 Flow Chart of Teaching the Board Recognition
3Y3C-E-EMD05-A01-00
Created by PT100
When automatic lamp setting is selected, it
is unnecessary.
Page 5-4
Board Recognition Teaching
5-2-3 Creating Procedure
Check that “Board recognition” for the data created by PT100 is turned on before board recogni-
tion.
1. Display the main menu screen and
send the board data for changing
production board , by PT 100.
2. Press
Data modify
.
• Data modification menu screen appears.
3. Press Production data teach .
• Production data teaching screen appears.
4. Press Board recog .
• Board recognition screen appears.
3Y3C-E-EMD05-A01-00
To the next page
Page 5-5
TEACHING
5
Board Recognition Teaching
5. Set the board to front conveyor.
6. Press
UNLOCK
and Teach start .
• Board is carried in.
7. Board is automatically recognized.
If recognition result is A : 100, press
Complete .
• Data is automatically saved.
8. Press
UNLOCK
and Next point .
• Move to the next board recognition mark and
recognition is automatically carried out.
9. Repeat the procedures 7 to 8, and
after board recognition teaching,
press .
3Y3C-E-EMD05-A01-01
To the next page
1
4G3C-EEn-DmPtBr-002
2
3Y3C-086P
3Y3C-086P