OPERATING MANAUAL(FOR ENGINEERS) - 第16页
Page 16 SAFETY PRECAUTIONS Be sure to observe WARNING 3Y3C-E-EMD00-A03-00 M08E ONL Y THE PERSON IN CHARGE OF MAINTENANCE MUST REP AIR OR ADJUST THE MACHINE. The machine may be incorrectly repaired or ad- justed, resultin…
Page 15
SAFETY PRECAUTIONS
Be sure to observe
WARNING
L13EB
DO NOT DISABLE
SAFETY SENSOR.
You will have serious injury by
active part if you disable safety
sensor.
Do not remove the sensor,
put any objects in or turn off
the switch so that the safety
sensor work properly and
effectively.
L15EB
HIGH VOLTAGE.
You will have serious electric
shock if you touch electric
power supply inside.
WORKER OPERATING
IN THE BACK.
If you start the machine without
confirming that it is safe to do
so, it may cause injury to the
worker behind the machine.
Make sure that no worker is
in the back when machine
starting.
L18EB
WORKER OPERATING
IN THE FRONT.
If you start the machine without
confirming that it is safe to do
so, it may cause injury to the
worker in front of the machine.
Make sure that no worker is
in the front when machine
starting.
L19EB
M03EB
DO NOT PLACE ANY
OBJECTS WHICH
CARRY ELECTRIC
CURRENT INSIDE THE
ELECTRICAL EQUIP-
MENTS.
There is a risk of electric shock
or leak.
M09E
TAKE CARE NOT TO
PINCH YOUR HANDS
OR FINGERS.
You will have serious injury if
your hands or fingers are
caught in the conveyors during
manual (or automatic) width
adjustment.
M02E
BEFORE INSPECTING PNEUMATIC
EQUIPMENTS, CUT OFF THE AIR
SUPPLY AND EXHAUST AIR FROM
THE EQUIPMENTS.
You will have serious injury if the residual pressure
actuates the machine.
Before inspecting pneumatic equipment, cut off
the air supply and exhaust the air from the
equipment.
Switch OFF the power.
M11E
DO NOT ALLOW ANY PERSON WHO
HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MA-
CHINE.
The machine may be operated improperly and
injure you.
Either carry out training by yourself, or consult
the manufacturer.
3Y3C-E-EMD00-A03-00
Page 16
SAFETY PRECAUTIONS
Be sure to observe
WARNING
3Y3C-E-EMD00-A03-00
M08E
ONLY THE PERSON IN CHARGE OF
MAINTENANCE MUST REPAIR OR
ADJUST THE MACHINE.
The machine may be incorrectly repaired or ad-
justed, resulting in malfunction.
Have the machine repaired or adjusted by a
trained professional maintenance engineer.
Consult the manufacturer for training.
DO NOT PLACE YOUR HANDS OR
BODY INSIDE ACTIVE PART OF THE
MACHINE WHEN IT IS IN A SINGLE
STOP OR CYCLE STOP CONDITION.
The machine has been stopped only temporarily.
You may be injured if the sensors are actuated and
the machine moves unexpectedly.
Turn OFF the servo switch before placing your
hands or body inside the active part.
M34EB
M95E
DO NOT DISAS-
SEMBLE THE HEIGHT
SENSOR UNIT.
If you disassemble the unit,
safety can not be ensured. You
may be injured or machine may
break down.
If a breakdown occurs,
consult the manufacturer.
L32E
WATCH YOUR HANDS.
Caught hands between board
holder and this cover will have
serious injury.
Page 17
SAFETY PRECAUTIONS
Be sure to observe
3Y3C-E-EMD00-A03-01
WARNING
FIRMLY INSERT THE
POWER AND OTHER
PLUGS.
Imperfect plugging in may
cause fire because of electric
shock and generated heat.
Do not use the damaged plug
or loose outlet.
M87E
M88EB
DO NOT INSERT OR
REMOVE POWER AND
OTHER PLUGS BY
WET HAND.
If plugged in or unplugged by
wet hand, it may result in
electric shock.
USE THE SPECIAL-
IZED OUTLET AND
BREAKER EXCLU-
SIVELY.
If the breaker is shared be-
tween machines, it may cause
fire because of generated heat.
Check the dissipation power
in your Standard Specifica-
tion before consulting an
electrical contractor.
M89EB
M06E
GROUND THE MA-
CHINE PROPERLY.
There is a risk of an electric
shock or leak.
Consult a professional
electrical contractor.
PERIODICALLY REMOVE DUST
FROM POWER PLUG.
Dust on the plug may result in fire caused by
defective insulation because of moisture.
Pull out the power plug and wipe off dirt with dry
cloth.
If the machine is not going to be used for a long
period, turn off the breaker connected with the
machine.
M86E
DO NOT DAMAGE POWER AND
OTHER CORDS OR PLUGS.
Damaged cord and plug may cause electric shock,
short circuit or fire.
Hold the plug when plugging in or unplugging.
Cord and plug repairs should be attempted only
by the person competent to do the electrical
work, or contact the manufacturer.
M85E
Never damage, remake, bring
close to heating appliances, bend
forcibly, twist, pull, put heavy
objects on, and bundle up.