00194547-09_InstallationManual_60103SP4_EN_DE - 第64页
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007 PnP/PCI Configurations =================================================================== PNP OS Installed [No] Reset Configuration Data [Disabled…
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
4.7.1.4 Deactivating the USB interface
4.7.1.4.1 Deactivating the USB controller
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
===================================================================
> Standard CMOS Features | > Frequency/Voltage Control
> Advanced BIOS Features | > Load Fail-Safe Defaults
> Advanced Chipset Features | > Load Optimized Defaults
> Integrated Peripherals | > Set Supervisor Password
> IMC Miscellaneous | > Set User Password
> Power Managment Setup | > Save & Exit Setup
> PnP/PCI Configurations | > Exit Without Saving
> PC Health Status |
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
Integrated Peripherals
===================================================================
> OnChip DIE Device
> Onboard Device
> SuperIO Device
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
Onboard Device
===================================================================
USB Controller [Disabled]
x USB 2.0 Controller Enabled
x USB Keyboard Support Disabled
x USB Mouse Support Disabled
…
4.7.1.4.2 Deactivating the USB interrupt
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
===================================================================
> Standard CMOS Features | > Frequency/Voltage Control
> Advanced BIOS Features | > Load Fail-Safe Defaults
> Advanced Chipset Features | > Load Optimized Defaults
> Integrated Peripherals | > Set Supervisor Password
> IMC Miscellaneous | > Set User Password
> Power Managment Setup | > Save & Exit Setup
> PnP/PCI Configurations | > Exit Without Saving
> PC Health Status |
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
63 of 89
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
PnP/PCI Configurations
===================================================================
PNP OS Installed [No]
Reset Configuration Data [Disabled]
Resources Controlled by [Auto(ESCD)]
x IRQ Resources Press Enter
x IMA Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
Assign IRQ for USB [Disabled]
. . .
→ Save the BIOS settings and exit the BIOS Setup.
4.7.1.5 Restore initial configuration
→ Remove RMOS installation CD from the USB CD drive.
→ Remove the keyboard from the machine controller and connect it to the station computer.
→ Switch video multiplexer to SR1.
→ Disconnect the USB cable from the USB CD drive and the machine controller.
→ Press <Ctrl><Alt><Del> to warm start the machine controller.
4.7.2 BIOS update and settings
The current BIOS version and the required BIOS settings are supplied as ISO images on the
installation CD. These images can be used to create bootable CDs with suitable CD writing software
on a PC with a CD writer. These CDs can in turn be used to automatically update the BIOS and
make the BIOS settings.
Procedure:
→ Create the CD 'MC – BIOS Update CPU086'.
→ Create the CD 'MC – BIOS Settings CPU086' .
→ Remove the keyboard from the station computer and connect it to the machine controller.
→ Switch the video multiplexer to SR2/MC.
→ Insert the 'MC – BIOS Update CPU086' CD in the USB CD drive and connect the drive to the
machine controller using a USB cable.
→ Press <Ctrl><Alt><Del> to warm start the machine controller.
→ During the warm start, press <Del>.
→ Set the BIOS so that the system boots from the USB CD drive (see section
4.7.1.2).
→ Reboot the machine controller and follow the BIOS update instructions.
64 of 89
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
→ Insert the CD 'MC – BIOS Settings CPU086'.
→ Reboot the machine controller and follow the BIOS setting instructions.
→ Reboot the machine controller and deactivate the USB interface again (see section
4.7.1.4).
→ Restore the initial configuration (see section 4.7.1.5).
4.7.3 Manual installation of the machine controller software
The following step can be omitted if the station software is installed. (The MC Distributor is called
during the course of the station software installation.)
→ Open the Start menu and select Programs Æ Siplace Æ MC Distributor. The installation is
started.
→ Follow the instructions on screen.
Note:
To convert the machine data manually from SR 601.01 to SR 601.03 or SR 601.03 SP4, the
software package has to be installed.
To install it, activate the option Installing SW-Package at the MC in the MC Distributor.
65 of 89