00198171-02_Technical_Training_FSE_TX-Series_EN - 第7页
1 Machine Safety 1.1 Machine Safety Technical Training FSE SIPLACE TX-Series 01/2018 7 1 Machine Safety 1.1 Machine Safety CAUTION Any persons working on the machine must be familiar with the safety instructions in the u…
6 Technical Training FSE SIPLACE TX-Series 01/2018
Table of Contents
10 JTF-ML.. 157
10.1 JTF (JEDEC Tray Feeder) - General Overview.. 157
10.2 JTF (JEDEC Tray Feeder) - Technical Data.. 157
10.3 JTF (JEDEC Tray Feeder) - Operation .. 158
10.3.1 Overview.. 158
10.3.2 Button Description.. 159
10.3.3 LED indication.. 159
10.4 JTF (JEDEC Tray Feeder) - Power and Communication.. 160
10.5 JTF (JEDEC Tray Feeder) - Adjustment.. 161
10.6 Analysis - Common Error List.. 162
10.6.1 General.. 162
10.7 Maintenance.. 163
10.8 Excercise: JTF-ML.. 164
1 Machine Safety
1.1 Machine Safety
Technical Training FSE SIPLACE TX-Series 01/2018 7
1 Machine Safety
1.1 Machine Safety
CAUTION
Any persons working on the machine must be familiar with the safety instructions in the
user manual and observe this at all times. The following safety instructions are only an ex-
cerpt from the chapter "Operational Safety" in the SIPLACE user manual. For further de-
tailed safety information please refer to the User Manual that was supplied with your
machine. Please pay attention to the safety instructions as delivered by our instructor.
TX buttons and switches
1. Emergency stop button
2. Stop and start buttons
3. Button for docking and undocking the
component trolley at the respective loca-
tions
NOTICE
DO NOT use the emergency stop button to stop the machine unless in emergency
situation! Use only the stop button (black) for general machine stop!
Permanent magnets symbol
●
Risk of death for persons with active
implants (e.g. pacemakers, insulin
pumps, defibrillators).
●
Danger of crushing for persons with
passive metal implants (e.g. plates,
screws).
●
Do not reach into the machine or bend
towards it when the protective covers
are open.
●
Do not bring any metal objects into the
area.
1 Machine Safety
1.2 Warning Labels - General
8 Technical Training FSE SIPLACE TX-Series 01/2018
Permanent magnets
Permanent magnets for TX series
1. Permanent magnets for X linear motors
2. Permanent magnets for Y liner motors
1.2 Warning Labels - General
Warning Labels General
1. Read safety instructions before use
2. Danger of crushing – Do not reach into
the machine while it is operating
3. Yellow ring around the emergency stop
buttons
4. Dangerous Voltages – risk of electric
shock or burn – areas of the machine
where high voltages are present
5. In some areas voltages can be present for
up to 5 minutes
Warning Labels Lasers
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
DO NOT look into beam!
Warning strips on the inside of the output conveyor
Risk of hand injuries (crushing) over an ex-
tensive area.
Reaching in here can lead to injuries to the
arms and hands.
Do not reach into the inside of the neighbor-
ing machine.