5OM-1626-001_w - 第15页

Safety Precautions Safe-4 1OM-1610  If the bank feeder change cart is not set, a clearance will be left at the feeder setting area and the operator will be exposed to danger . Be sure to use the mach ine with the bank …

100%1 / 213
Safety Precautions
Safe-3
1OM-1610
0911-001
2. Common Precautionary Items
Precautions before Use
Only a well-trained person should operate the machine.
Do not allow any untrained person to operate the machine.
Mishandling of the machine can cause a serious accident.
Before operating the machine, please read the instruction manual carefully for correct
operations.
Although the precautionary items have been reviewed rep
eatedly
, an incident far
beyond our expectation may occur.
Not only follow the precautionary instructions describe
d in the instruction manual but
also try to handle the machine carefully at your discretion all the time.

Conrm
that
no
coversaredisengagedbeforeoperatingthemachine.
If the machine is used with its cover(s) being detached, a serious accident may
occur.
Be sure to attach them in place.

Make certain that no person or object comes in contact with the moving
mechanisms of the machine. Then, check safety and power up the machine to
start operation.
Do not start the machine unless those working in the immediate area of the
machine are aware of hazards from moving parts.

Those who wear implanted pacemakers are not allowed to work inside the
machine.
This machine uses strong permanent magnets in the moving areas of the X/Y
beams.
The pacemaker may be affected by the magnetism and a serious accident will
result.

Those who wear implanted pacemakers are not allowed to handle the tape
feeders.
The pacemaker may be affected by the magnetism and a serious accident will
result.
2. Common Precautionary Items
Safety Precautions
Safe-4
1OM-1610

If the bank feeder change cart is not set, a clearance will be left at the feeder
setting area and the operator will be exposed to danger.
Be sure to use the machine with the bank feeder change cart being connected.

Even after the [EMERGENCY STOP] switch is pressed, note that electrical
power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to "OFF".
When
"Emer
gency Switch Off" is required, it must be prepared outside the machine on
the customer side.
Emergency Switch Stop : Emergency Interception of Controlled Load Power Sources
Emergency Switch Off :
Emergency Interception of All Load Power Sources
In principle, the overall operation of the machine including the button
operations on the operation panel and the touch screen must be controlled by
only one person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the hard disk data be periodically backed up with the
network terminal (option).
Do not use the oppy disk drive in the control box.
The drive is provided only for the
authorized maintenance personnel.
Be sure to strictly keep the above-mentioned instructions. Otherwise, not only wrong
operations of the machine but also personal injury will result.
09
11-001
2. Common Precautionary Items
Safety Precautions
Safe-5
1OM-1610
0911-001
Notes on Machine Operations
Please keep the instruction manual in a safe place within reach.
Follow the instructions in the instruction manual for correct handling of the machine.
Be sure to fully understand the contents of the safety instructions in the instruction
manual and follow the instructions.
Please pay special attention to the precautionary items lab
eled on the machine or
described in the instruction manual and be sure to keep them.
When the precautionary
items are ignored, it will result in personal injury or property damage (damage to the
machine).
Be sure to follow the operational instructions described in
the instruction manual.
Do not modify the machine nor use any parts other than the specied ones for the
machine. Be sure not to use the machine with its safety devices detached. Doing
otherwise may cause personal injury
.
Also, be sure not to change the setting of the operating
system nor install any software
additionally
.
Do not perform any operations other than those described in the instruction manual.
Whenever a problem arises, regarding the machine operations, performance, etc.,
please contact the marketing department or sales agency of Hitachi High-T
echnologies
for the solution.
This machine uses energetic driving systems and high voltage to run at high
speed.
This power and voltage is high enough to cause death or serious injury
.
T
o avoid this danger, respect the following guideline.
•
The machine must be used with the covers being attached.
•
Be sure to close the covers (door type) before operating the machine.
•
Do not disengage the interlock mechanism of the covers (door type).

Whenever you feel danger or abnormality
, immediately press the
[EMERGENCY STOP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.

Conrm
thatthe
"LOCK"lamp(green)isONontheoperationpanelbefore
operating the machine.
 Ifthe"LOCK"
lampisnotturnedON,themachinecanbeoperatedatanytime
from both front and rear sides, endangering the operators around the machine.
2. Common Precautionary Items