5OM-1626-001_w - 第18页

Safety Precautions Safe-7 1OM-1610 Notes on Installation, T ransfer and Maintenance  Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including s …

100%1 / 213
Safety Precautions
Safe-6
1OM-1610

When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
 Aftertheproblem
hasbeenrectiedcompletely,resetthemachinetoits
normal condition.

When the green lamp of the light tower is ON or ickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode).

In case of a disaster of any kind, earthquake, storm, ood, re, or lightning,
immediately stop the machine and turn off the power supply.

When the machine stops due to a component pickup error, be sure to remove the
mispicked component from the feeder and start the automatic operation.

Do not use any unspecied feeders.
09
11-001
2. Common Precautionary Items
Safety Precautions
Safe-7
1OM-1610
Notes on Installation, Transfer and Maintenance

Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including s
afety and accuracy
, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer
. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are
not described in this manual.
Otherwise, not only breakdown of the machine but also
personal injury may result.

When an alert label has deteriorated and become illegible, contact our service
department.

Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.

Before the maintenance work, be sure to turn off the power breaker and lock
them with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.

Even when the power breaker is set to "OFF", the primary line is powered,
making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.

Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplier go "OFF" in 10 minutes or more after the power breaker
is set to "OFF".
0911-001
2. Common Precautionary Items
Safety Precautions
Safe-8
1OM-1610
3. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " DA NGER "
Alert Description Pages
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them.
Doing otherwise will cause personal injury (serious accident).
•
Onlyqualiedmaintenance
personnelshoulddetachthe
covers.
•
The machine should be operated with the transparent covers
being attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to close the transparent covers (door type) before
operating the machine.
•
Do not disengage the interlock mechanism of the transparent
covers (door type).
"2.4" in
"Chapter 1 (Vo. 1)"
"1.1.3" in
"Chapter 3 (Vol. 1)"
0911-001
DANGER
3. Alert Indications in Instruction Manual