5OM-1626-001_w - 第35页
Safety Precautions Safe-24 1OM-1610 091 1-001 4. Alert Labels No. Alert Labels and Description (4) 10-0267- Description Permanent magnets are used in the tape feeding and cover tape take-up sections of the tape feeder …
Safety Precautions
Safe-23
1OM-1610
Alert Labels and Description
No. Alert Labels and Description
(1)
10-0280-
Description
When maintenance or checks are performed, make sure to turn off the power to the
machine or air source. When maintenance or checks are performed with the power
or air turned ON, an electric shock or injury might be caused.
(2)
10-0265-
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(3)
10-0266-
Description
Strong permanent magnets are used in the moving mechanisms of the X/Y beam.
Those who wear implanted pacemakers should not work inside the machine.
The pacemaker may be affected by magnetism, causing a serious accident.
0911-001
4. Alert Labels
Safety Precautions
Safe-24
1OM-1610
0911-001
4. Alert Labels
No. Alert Labels and Description
(4)
10-0267-
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape
feeders. Otherwise, the pacemaker may be affected by magnetism, causing a serious
accident.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servoamplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(6)
10-0269-
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.
Safety Precautions
Safe-25
1OM-1610
0911-001
4. Alert Labels
No. Alert Labels and Description
(7)
10-0281-
Description
When a cover (Transparent Cover) is opened or closed, be sure to hold the grip and
slowly move the cover up or down. Otherwise, your hand and ngers might get
caught in the door and get injured.
(8)
10-0268-
Description
Before maintenance work, shut off the power breaker and lock it with the padlock.
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
(9)
10-0279-
Description
Do not drop a head. Otherwise, a foot injury will result or the head itself may be
damaged.
Carefully handle each head one by one and do not drop any.