YSI_Prog_E - 第158页
3-35 3 Step screen 4 Specify "Replace with". Enter the value following the change in the "Rep lace with" screen in the lower left. Select "NON" in the value field for items that are not to b…
3-34
3
Step screen
4. Batch replacement and search
4.1 Batch replacement
This function is used to set conditions for steps being replaced, and batch replace item values for applicable
steps with specified values.
c
specifying conditions and replacement settings.
1
Press the [Replace] button in the "Utility" tab.
A "Replace" screen appears.
"Replace" screen
Search items
Replacement items
Number of search items
[Get Light] button Number of replacement items
List of steps subject to replacement
[Execute] button
Replacement details list
24339-P6-00
2
Specify "Find what".
Enter conditions for view ranges and inspection statuses, etc. to be changed in the "Find what" screen in
the upper left. Select "NON" in the value fields for items that are not to be changed. Ensure that the
number displayed in "The number of items in the Finding list" matches the number of items to be found.
TIP
The content of "Find what" will differ depending on the inspection status.
3
Check the "Step List to be Replaced".
Steps to be replaced are displayed in the "Step List to be Replaced" in the upper right of the screen.
Ensure that the number displayed in "The number of steps" matches the number of items to be replaced.
3-35
3
Step screen
4
Specify "Replace with".
Enter the value following the change in the "Replace with" screen in the lower left. Select "NON" in the
value field for items that are not to be changed. If wishing to specify the selected step lighting settings
for "Replace with", press the [Get Light] button. Values are entered automatically.
Ensure that the number displayed in "The number of items in the Replacing list" matches the number of
items to be replaced.
TIP
Items displayed in the "Replace with" screen differ depending on the inspection status.
5
Check the replacement details list.
Items to be replaced are displayed in the replacement details list in the lower right of the screen. Check
whether the content set in "Before replacement" and "After replacement" is correct.
6
Press the [Execute] button.
Press the [Yes] button at the confirmation message that appears. To cancel, press the [No] button. Press
the [OK] button at the change complete message that appears.
7
Press the [Close] button to end deployment.
3-36
3
Step screen
4.2 Search
By pressing the [Search] button at the "Utility" tab, a "Search" screen appears. This screen is used to search for
the next step matching the set search conditions.
"Search" screen
Step 2
Step 3
Step 1
[Search] button
[Close] button
24340-P6-00
1
Specify the search type.
Select from "Step No.", "View step", "Ref. No.", "Status", "Parts Name", "Block No."
2
Specify the search character string.
Enter the search content details.
3
Select the search direction.
Select the direction with the radio buttons.
4
Press the [Search] button.
Each time this button is pressed, the next step matching the search conditions is displayed on the step
screen.
5
Press the [Close] button to end deployment.