YSI_Prog_E - 第215页

5-10 5 Inspection machine settings "Machine settings" screen "Setting" m "Machine Information" m "Installation Setting" 2/2 5 6 4 7 8 9 24511-P6-00 Item Details 4 Periodic Light Ch…

5-9

Inspection machine settings

2.1 Installation settings

Installation settings are used to specify default machine settings.

"Machine settings" screen

"Setting" m "Machine Information" m"Installation Setting" 1/2

24510-P6-00

Item Details

Basic Brand Displays the brand name of this machine.

Machine Type Displays the machine type.

Sub Machine Type Displays the sub machine type.

Serial No. Displays the machine serial No.

Machine Name

Enter the machine name appended to data sent to the Repair

Station (option).

OS Language Sets the OS language used.

Function Setting Inspection Mode

Select the inspection mode for automatic inspection from "AUTO" or

SEMI-AUTO".

• AUTO

Performs board inspection to the end, and then displays details of

any defects.

• SEMI-AUTO

Inspection is terminated the moment a defect is detected during

board inspection, and the defect location displays on the NG

monitor. Judgment is made while viewing defect location images.

Counter is initialized

after program loading

When set to "Use", the total production quantity is initialized to "0"

when reading inspection data.

Inspection skip of NG

parts

Selects the steps to be skipped when an NG occurs.

• NON

Inspection is not skipped.

• Ref unit

Steps from the same Ref. No. onward are skipped.

• Pin unit

Steps from the same Pin. No. onward are skipped.

X-ray Source Auto Self

Test

When set to "Enable", a self test is performed after the X-ray source

warm-up is complete.

Image Setting OK,NG Image Quality

Selects the file format for saving images from "JPG" or "BMP".

"JPG" should normally be selected. If "BMP" is selected, inspection

images can be saved as is, however, the time required to save

images is longer than that for "JPG", and more space is required.

Inspection will stop if there is insufficient backup space, and

therefore caution is advised.

Image Auto SAVE

Select whether to automatically save inspection images from "No

Use", "Ng Image", or "All".

• No Use

Does not automatically save inspection images.

• Ng Image

Saves NG view images and fiducial mark images to the

"NgImage" folder contained in the inspection data folder when an

NG occurs.

• All Image

Saves all view images and fiducial mark images.

MAX Collection

Sets the maximum number of boards that can be saved to a

program.

5-10

Inspection machine settings

"Machine settings" screen

"Setting" m "Machine Information" m "Installation Setting" 2/2

24511-P6-00

Item Details

Periodic Light Check Cycle

Set to perform a periodic lighting check. Select from "No Use",

"Daily", or "Weekly".

Start Time

Specifies the lighting check start time when "Daily" or "Weekly" is

selected for the "Cycle".

Week

Specifies the day on which the lighting check is performed when

"Weekly" is selected for the "Cycle".

5 Vision

Wating Timer for

Sampling (mm)

Displays the time until image capture is started after the camera or

conveyor (YSi-X) moves.

X-Ray (YSi-X) X-Ray source Type Displays the X-ray source installed on the machine.

Image Join (Standard

Only)

Enables multiple X-ray image composition when set to "Use".

X-Ray Zoom Enables the capture of enlarged X-ray images when set to "Use".

X-Ray Tilt sight Enables the capture of tilted X-ray images when set to "Use".

X-Ray Shading Data

Update Cycle (min)

Sets the cycle for X-ray shading.

Conveyor Fixed Conveyor Displays the standard conveyor when changing the conveyor width.

AUTO Width Adjustment

If "ON" is displayed, the conveyor width is changed when reading

the program. If "OFF" is displayed, the conveyor width is not

changed when reading the program.

ConvFlowDirection Displays the conveyor flow direction.

Board Cooling (sec) Sets the waiting time at the conveyor entrance for board cooling.

Board Wating Timer

(msec)

Specifies the conveyor idling time until the board is clamped after

hitting the stopper when performing board loading.

Carry Out Timer (msec) Specifies the conveyor idling time when unloading boards.

Upper Handing

Sets the specification for the transfer of board signals with the

upstream machine.*

Lower Handing

Sets the specification for the transfer of board signals with the

downstream machine.*

NG Stop

Stops the machine and sets the timing of the message output when

an NG board occurs during automatic inspection.

Select from "No Use", "Before Export", and "After Export".

• No Use

This function is not used.

• Before Export

Displays a message at the inspection position.

• After Export

Displays a message after unloading the board from the machine.

Transter Mode

Sets the board transfer method from "NORMAL", "DEMO U-TURN",

or "DEMO Fixed".

NG Stocker Type

Selects the NG stocker type if equipped with an NG stocker. Select

"Through" if not equipped with an NG stocker.

5-11

Inspection machine settings

Item Details

Maker Maker Unit Set to "Use" if the machine is equipped with a marking unit (option).

Maker Unit Type Sets the existence of a pen cap.

Ink Check Interval

(markings)

Sets the friction check interval with the number of boards.

9 Laser Laser Unit

Set to "Use" if the machine is equipped with a laser height sensor

(option).

* Signals can be checked during automatic inspection at the [Auto] - "Conveyor" tab. Furthermore, "T01000" can be output at

the conveyor at the [Unit] - "I/O" tab.

2.2 Conveyor transfer settings

Conveyor transfer settings are used to set the board loading and unloading positions and so on.

"Machine settings" screen

"Setting" m "Machine Information" m "Conveyor Setting"

24512-P6-00

Item

Details

Auto Manual

When performing automatic

inspection

When performing manual

inspection

Board Transter

control

IN Sets the board entrance.

OUT Sets the board exit.

NG CONT Sets the board exit when NG results continue.

Cancel Sets the board exit when inspection is canceled.

2 Monitor Post-Process

Downstream signals are monitored when the check box is selected.

An alarm occurs if no "Busy In" signal is input from downstream

even when the timeout time is exceeded.