YSI_Prog_E - 第54页

1-19 1  asic operation Item Applicable model Status Other Stopper YSi-12 YSi-X Lights up green when the board stopper is closed. Clamp YSi-12 YSi-X Lights up green when the board clamp is closed. Edge Clamp – YSi-X Ligh…

100%1 / 226
1-18
1
asic operation
1.5.7 "Conveyor" screen
Displays the current conveyor status.
[Auto] – [Conveyor] screen
YSi-12, YSi-X
YSi-12
YSi-X
24119-P6-00
Item
Applicable model Status
Upstream
side
Busy Out YSi-12 YSi-X
Lights up green when outputting a board transfer permission signal to
the upstream machine.
BA In YSi-12 YSi-X
Lights up green when inputting a board unloading request signal from
the upstream machine.
Ent. Upper – YSi-X Lights up green when the entrance shutter is open.
Ent. Lower – YSi-X Lights up green when the exit shutter is closed.
Downstream
side
Busy In YSi-12 YSi-X
Lights up green when inputting a board transfer permission signal from
the downstream machine.
BA Out YSi-12 YSi-X
Lights up green when outputting a board unloading request signal from
the downstream machine.
Exit Upper – YSi-X Lights up green when the entrance shutter is open.
Exit Lower – YSi-X Lights up green when the exit shutter is closed.
Conveyor
Push Up YSi-12 YSi-X Lights up green when the push up is up.
Entrance,
Inspection, Exit
YSi-12 YSi-X Lights up green when the board is present at each position.
Inspection
result
Result OK YSi-12 YSi-X Lights up green when the board inspection result is "OK".
Result NG YSi-12 YSi-X Lights up green when the board inspection result is "NG".
1-19
1
asic operation
Item
Applicable model Status
Other
Stopper YSi-12 YSi-X Lights up green when the board stopper is closed.
Clamp YSi-12 YSi-X Lights up green when the board clamp is closed.
Edge Clamp – YSi-X Lights up green when the edge clamp is closed.
MS Board sensor – YSi-X Lights up green when the sensor at the main stopper detects a board.
MS Safety sensor – YSi-X Lights up green when the main stopper is down.
1.5.8 "Carry Log" screen
Displays events relating to board transfer during automatic inspection.
[Auto] – [Carry Log] screen
24120-P6-00
1-20
1
asic operation
1.6 Unit (manual operation) screen
This section describes manual operation buttons on the "Unit" screen.
n
NOTE
The "Unit (manual operation)" screen does not work with the optional YSi-OS offline software. Basic operation
1.6.1 "Conveyor" screen
This screen allows you to operate the conveyor unit and so on.
[Unit] – [Conveyor] screen
1 4
3
5 6 7
13
14
15
16
19
17
18
10 11 12
20
2
8 9
24 22 23
21
25
26
27
YSi-X
Display area
YSi-12
YSi-S
24121-P6-00