YSI_Prog_E - 第57页

1-22 1  asic operation 1.6.2 " I/O" screen T his screen allows you to perform I/O signal status c hecks and turn outputs ON and OFF . n YSi-S, YSi-X [Unit] – [I/O] screen YSi-S, YSi-X 1 3 2 4 24122-P6-00 Item/…

100%1 / 226
1-21
1
asic operation
Item/button
name
Applicable model Description
1 Zoom YSi-X YSi-12 YSi-S
+ : Enlarges the image.
- : Reduces the enlarged image.
The image can also be enlarged and reduced by rotating the mouse wheel.
2 Change lighting YSi-X YSi-12 YSi-S
Changes the mark image lighting.
(U, H, M, L)
3 0.1mm YSi-X YSi-12 YSi-S
Pressing the button each time changes the camera movement pitch when
the scroll bar arrow is pressed. (0.01 mm, 0.100 mm, 0.500 mm, 5.000 mm)
4 Table YSi-X YSi-12 YSi-S
The image position can be moved using the arrows, or by entering values
directly in the "Now Position" fields.
YSi-X : The table moves.
YSi-12 : The camera moves.
YSi-S : The camera and table move.
5 Head YSi-X – –
The X-ray source and optical camera can be moved using the arrows, or by
entering values directly in the "Now Position" fields.
HZ button : Moves the X-ray source up and down.
HS button : Moves the optical camera left and right.
6 XRay Cam YSi-X – –
The X-ray detector can be moved using the arrows, or by entering values
directly in the "Now Position" fields.
7 Conveyor YSi-X YSi-12 –
Press the [W] button to turn the conveyor brake ON and OFF.
YSi-X : Press the [W+] button and [W-] button to move the conveyor
position.
Press the [MS+] button and [MS-] button to move the stopper
position.
YSi-12 : Press the [W+] button to widen the conveyor width.
Press the [W-] button to narrow the conveyor width.
8 Width YSi-X YSi-12 – Displays the conveyor width change screen.
9 Cycle Capture YSi-X YSi-12 YSi-S Displays the upper left display area for continuous capture.
10 Stopper YSi-X YSi-12 – Opens and closes the board stopper.
11 Edge Clamp YSi-X YSi-12 – Opens and closes the board clamp.
12 Clamp YSi-X – – Opens and closes the edge clamp.
13 Setup Pos. YSi-X YSi-12 YSi-S The conveyor moves to the setup position.
14 Inlet Pos. YSi-X – – The conveyor moves to the loading position.
15 Inloading Pos. YSi-X – – The conveyor moves to the unloading position.
16 Origin YSi-X YSi-12 YSi-S The head, conveyor, and laser unit move to their respective origin positions.
17 Cover Lock YSi-X YSi-12 – Opens and closes the safety cover lock.
18 L Shutter YSi-X – – Opens and closes the right side shutter.
19 R Shutter YSi-X – – Opens and closes the left side shutter.
20 Low Left YSi-X YSi-12 –
Rotates the conveyor to the left at low speed.
Press the button once more to stop.
21 Low Right YSi-X YSi-12 –
Rotates the conveyor to the right at low speed.
Press the button once more to stop.
22 L.Conv. YSi-X YSi-12 –
Rotates the conveyor to the left.
Press the button once more to stop.
23 R.Conv. YSi-X YSi-12 –
Rotates the conveyor to the right.
Press the button once more to stop.
24 Push Up – YSi-12 – Raises and lowers the push up plate.
25 Open – – YSi-S Opens the motorized cover.
26 Close – – YSi-S Closes the motorized cover.
27 OTHERS – – YSi-S Displays the current status of each parts.
1-22
1
asic operation
1.6.2 "I/O" screen
This screen allows you to perform I/O signal status checks and turn outputs ON and OFF.
n
YSi-S, YSi-X
[Unit] – [I/O] screen
YSi-S, YSi-X
1
3
2
4
24122-P6-00
Item/button name Description
1 ON/OFF switch (individual) Turns the output signal for the location selected with the cursor ON and OFF.
2 ON/OFF switch (line) Turns the output signals for the line selected with the cursor ON and OFF.
3 Output signal description
Displays the output signal name selected with the cursor, and the meaning of "0"
and "1".
4 Input signal description
Displays the input signal name selected with the cursor, and the meaning of "0"
and "1".
1-23
1
asic operation
n
YSi-12
[Unit] – [I/O] screen
YSi-12
1 2
24123-P6-00
Item Function
1 Output Port No.
Clicking check boxes turns the output signal for the selected location ON and
OFF.
2 Input Status Displays the item ON and OFF status.