4M-1751-005w_G5S - 第113页
4OM-1751 1-63 1304-001 5.6 Hydraulic Cleaning Machine The use of a commercially available hydraulic cleaning machine is available. Example : Mac3 I I I (Maker : Nakamura Cyoukou) Note When the hole is clogged with solder…
4OM-1751
1-62
•
For using the nozzle tip cleaning jig
A jig for cleaning HG22C or HG33C from the tip with a pin gauge, is provided.
Pin Gauge
Nozzle
Nozzle Tip Cleaning Jig
F4A54
Insert the nozzle from the tip section into the jig and insert the pin gauge gently
into the nozzle tip hole with the nozzle pressed against the jig.
In the case that the pin gauge is not easily inserted, do not insert it forcibly, but
repeat the pin gauge moving up and down operations.
1304-001
5.5 Cleaning of high-speed nozzle hole part with pin gauge
4OM-1751
1-631304-001
5.6 Hydraulic Cleaning Machine
The use of a commercially available hydraulic cleaning machine is available.
Example : Mac3 III (Maker : Nakamura Cyoukou)
Note
When the hole is clogged with solder paste, the cleaning operation might not be
available.
Clean it also with the pin gauge.
After the cleaning, dry it completely with air-blow or dryer.
5.6 Hydraulic Cleaning Machine
4OM-1751
1-641903-005
5.7 Nozzle Filter Insertion Procedure
5.7 Nozzle Filter Insertion Procedure
• Filter replacement jig for High-Speed and Middle-Size/Odd-Shape
Note
picking up Middle-Size/Odd-Shape component. The same procedures
apply to both jigs.
For Nozzle picking up
Middle-Size/Odd-Shape
component
For High-Speed Nozzle
Nozzle set position
F4A83
Procedure
tool.
Nozzle filter set position
F4A58A
Acrylic block
(for holing filter)
Acrylic block set on nozzle filter set position
Nozzle filter set position
F4A59A