4M-1751-005w_G5S - 第193页

Error ID Error Name, Description, Cause, and Remedy 431818 T ray Feeder Zeroing Error (Block1) Magazine(Lower) is not done positioning yet. Please conrm the Magazine position and Magazine lock lever . 431819 T ray Feede…

Error ID Error Name, Description, Cause, and Remedy

431808 Tray Feeder Zeroing Error (Block1)

Tray Safety Cover(Center) is open.

Please close Tray safety cover(Center), and then press READY button, lock the

cover.

431809 Tray Feeder Zeroing Error (Block1)

Tray Safety Cover(Lower) is open.

Please close Tray safety cover(Lower), and then press READY button, lock the

cover.

43180a Tray Feeder Zeroing Error (Block1)

Feeder base is Ready On

Please conrm Feeder Cart set correctly, and press Feeder Base READY button.

43180b Tray Feeder Zeroing Error (Block1)

No Magazine(Upper)

Please set Magazine(Upper).

43180c Tray Feeder Zeroing Error (Block1)

No Magazine(Lower)

Please set Magazine(Lower).

43180e Tray Feeder Zeroing Error (Block1)

Traverse axis Servo Alarm

-----

431810 Tray Feeder Zeroing Error (Block1)

Elevator axis Servo Alarm

-----

431811 Tray Feeder Zeroing Error (Block1)

Miss-Pickup comp. Detection 8mm[B15417]

-----

431812 Tray Feeder Zeroing Error (Block1)

Miss-Pickup comp. Detection 14mm[B15418]

-----

431813 Tray Feeder Zeroing Error (Block1)

Miss-Pickup comp. Detection 28mm[B15419]

-----

431814 Tray Feeder Zeroing Error (Block1)

Pallet chuck is not shut

-----

431815 Tray Feeder Zeroing Error (Block1)

The pallet Miss-Set was detected.

-----

431816 Tray Feeder Zeroing Error (Block1)

Magazine(Lower) Rack Shutter on the operator side is open.

-----

431817 Tray Feeder Zeroing Error (Block1)

Magazine(Lower) Rack Shutter on the side of Traverse is open.

-----

3.4 Tray Feeder (Block1)

4OM-1751

3-611701-005

Error ID Error Name, Description, Cause, and Remedy

431818 Tray Feeder Zeroing Error (Block1)

Magazine(Lower) is not done positioning yet.

Please conrm the Magazine position and Magazine lock lever.

431819 Tray Feeder Zeroing Error (Block1)

Elevator axis safety relay

-----

43181a Tray Feeder Zeroing Error (Block1)

Magazine(Upper) Rack Shutter on the operator side is open.

-----

43181b Tray Feeder Zeroing Error (Block1)

Magazine(Upper) Rack Shutter on the Traverse side is open.

-----

43181c Tray Feeder Zeroing Error (Block1)

Magazine(Upper) is not done positioning yet.

Please conrm the Magazine position and Magazine lock lever.

43181d Tray Feeder Zeroing Error (Block1)

Pick-up miss cmpnt detect

-----

431820 Tray Feeder Zeroing Error (Block1)

Zeroing incomplete

-----

431821 Tray Feeder Zeroing Error (Block1)

An elevator cannot move to the upper direction.There is XY beam at the ascent of

elevator position.

Perform All zeroing

434001 Tray Feeder Zeroing Error (Block1)

Tray feeder sequence timeout

-----

434002 Tray Feeder Zeroing Error (Block1)

Tray feeder sequence error

-----

438302 Tray Feeder Zeroing Error (Block1)

Elevator unit was not detected.

Please set up Tray Unit in Exchange location.

438303 Tray Feeder Zeroing Error (Block1)

Connector of Feeder base is not positioned correctly

Please Operate it after connecting connector of Feeder Base.

438304 Tray Feeder Zeroing Error (Block1)

Connector of Tray is not positioned correctly

Operate it after connecting connector of Tray.

438305 Tray Feeder Zeroing Error (Block1)

Time-out of Clamp operating of Elevator Unit.

-----

3.4 Tray Feeder (Block1)

4OM-1751

3-621701-005

Error ID Error Name, Description, Cause, and Remedy

438306 Tray Feeder Zeroing Error (Block1)

Feeder base is not in Upward position.

Please press READY switch on Feeder Base, and rise it after setting Feeder cart..

438402 Tray Feeder Zeroing Error (Block1)

Time-out of Unclamp operating of Elevator Unit.

-----

438403 Tray Feeder Zeroing Error (Block1)

Feeder base is not in Upward position.

Please press READY switch on Feeder Base, and rise it after setting Feeder cart..

438405 Tray Feeder Zeroing Error (Block1)

There were error when Tray receded.

-----

438406 Tray Feeder Zeroing Error (Block1)

There were error when elevator1(Down) receded.

-----

438407 Tray Feeder Zeroing Error (Block1)

There were error when elevator2(Up) receded.

-----

438408 Tray Feeder Zeroing Error (Block1)

There were error when traverse receded.

-----

438501 Tray Feeder Zeroing Error (Block1)

Time-out of waiting for initialization