4M-1751-005w_G5S - 第33页

Safety Precautions Safe-24 1OM-1751 1305-002 5. Alert Labels Alert Labels and Description No. Alert Labels and Description (1) Description    Th…

100%1 / 339
Safety Precautions
Safe-23
1OM-1751
5. Alert Labels
1305-002
00-0293-
(14)
F1X10
Safety Precautions
Safe-24
1OM-1751
1305-002
5. Alert Labels
Alert Labels and Description
No. Alert Labels and Description
(1)
Description

Those who wear implanted pacemakers should not work inside the machine.

(2)
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be a ffected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape

accident.
(3)
Description

machine or air source. When maintenance or checks are performed with the power
or air turned ON, an electric shock or injury might be caused.
Safety Precautions
Safe-25
1OM-1751
1303-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power

breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.