Specification_SIPLACE_S23HM_eng - 第13页

12 Description The tape reels of the feeder mod- ules are accomm odated in the tape container of the component changeover table. A cutter auto- matically chops up empty tape when it comes out. Feeder modules used on SIPL…

Description

SIPLACE S-23 HM is equipped

with two component changeover

tables to the left and right of the

PCB conveyor. The total capacity

is, e.g. 2 x 40 tape tracks, each

8 mm wide.

The component feeders are sta-

tionary during the placement proc-

ess, therefore it is possible to re-

plenish the components (e.g., in

sticks) or to splice on tapes with-

out machine idle.

For the changeover, individual

feeders or all the changeover ta-

bles can be exchanged without any

tools for component tables which

have been set up in advance out-

side the placement machine.

Using component bar codes with

the aid of an optional component

bar code scanner guarantees the

correct allocation of the compo-

nent to the track.

To fully utilize the advantages of

the component changeover tables,

the entire set-up include checks

can also be conducted outside the

machine at the optional SIPLACE

set-up station. The changeover ta-

bles are equipped with rollers and

have an integrated pneumatic lift-

ing device, avoiding the use of a

lifting cart as with the SIPLACE 80

modules. Exchanging the tables

takes less than 2 minutes per

module.

Component Supply:

Changeover Table

Technical Data

Insert (exchangeable) In all SIPLACE placement modules

Feeder locations 20 x 8 mm dual track per table =

40 x 8 mm tracks, 2 tables per machine

Feeder modules SIPLACE feeder

for tapes, stick magazines, Bulk Cases

Accessories Tape container, waste container,

lift cart, empty tape cutter

Splicing Tool

Exchange of a Feeder Changeover Table

Construction of a Changeover Table

Mobile

Changeover

Table

Feeder Table

Centering Position

SIPLACE Station

Compressed Air

Feeder Connection

Reel Container

Reject Bin

Mobile

Changeover

Table

Description

The tape reels of the feeder mod-

ules are accommodated in the

tape container of the component

changeover table. A cutter auto-

matically chops up empty tape

when it comes out.

Feeder modules used on SIPLACE

are distinguished by a short cycle

time and a highly accurate pick-up

position. Product diversity and

small batches sizes are also easily

managed, since changeover of the

modules can be handled quickly:

The increment of the tape cycle is

just as variable as the use of tape

materials. Thanks to the general

purpose tape feeder modules

which are equally suitable for pa-

per and blister tapes, a small range

of module types is sufficient. This

is a decisive advantage for invest-

ment and logistics. Once activated

by a signal from the component

table, the modules control the en-

tire feeder operation of the auto-

matic strip removal all by them-

selves.

The S Feeders series feature

shorter cycle times and they can

handle tapes with 2 mm grids

(8 mm S). 8 mm S and

12/16 mm S are equipped with

component cover.

Component Supply:

Tape Feeder

24 / 32 mm S

12 / 16 mm S

2 x 8 mm S

Technical Data

Packaging Model Feeder

locations

Transport

distance

Max. compo-

nent height

Paper and

blister tapes

2 x 8 mm S*

12 / 16 mm S

2 or 4 mm

4 - 12 mm**

2.5

Blister tape 24 / 32 mm S 1.5 4 - 32 mm** 14

Tape rolls

7" to 15" (178 - 381 mm)

Feeder cycle S-feeder 8 mm: 60 ms

* Reference mark to recognize the position of the feeder

** adjustable in increments of 4 mm

Tape Feeder Module S

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

bulk material. It feeds rectangular

and round passive components.

To refill, the Bulk Cases are ex-

changed, simply and without ma-

chine idle time.

The module essentially consists of

the basic element and the proper

feeder rail and Bulk Case based on

component type and height. The

components are separated and fed

by means of compressed air.

The principle of the stationary

components tables proves its

worth precisely when Bulk Cases

are used. For example, wear which

occurs during vibrations associated

with other placement concepts can

greatly impair the component

quality.

The stationary component table

also brings decisive advantages in

the case of stick magazines: The

general purpose vibratory feeder

can be refilled during placement.

Component Supply:

Bulk Case Feeder, Stick Magazine Feeder

Bulk Case Feeder and Stick Feeders

Bulk Case Feeder

Stick Magazine

Feeder Type III

Technical Data

Bulk Case feeder*

Packaging form Bulk Case

Feed rails for: Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location 1 feeder location for 2 different compo-

nent types

Stick magazine feeder Type III with control electronics

Number and width of tracks 3 x 9.5 mm

2 x 15 mm

1 x > 15 mm

1 x 30 mm

Feeder location 1 feeder location

* Reference mark to recognize the position of feeder